This is the problem. Don't use the fat / vvfat block driver for anything meaningful. I don't even have to look at particulars; as "fat" ("vvfat") is known to be a hack. In particular write operations

Hi all, How can I refresh the currently displayed form? The problem I'm trying to solve is that when on the BootManager page, insertion or removal of a device does not update the form, leaving the lis

Hi, this question is about the UEFI PDFs rather than the Tianocore implementation. I'm writing my DXE Foundation, and the documentation states " Allocate the UEFI Boot Services Table from EFI_BOOT_SER

Hi guys, I'm following some README on tianocore wiki in order to enable secure boot on edk2 version UDK2018 but I notice that I don't build AuthVariableLIb.c placed into SecurityPkg/LIbrary/AuthVariab

I use git version 2.27. Do you verify the latest git version? > -----邮件原件----- > 发件人: bounce+34241+423+4905953+8764802@groups.io > <bounce+34241+423+4905953+8764802@groups.io> 代表 Laszlo Ersek > 发送时间:

Hi，all May I ask when bug 2172 & 2177 will be fixed, is there any plan, thank you! https://bugzilla.tianocore.org/show_bug.cgi?id=2172 https://bugzilla.tianocore.org/show_bug.cgi?id=2177

Hey Experts I am looking for your help , how I can define device specific _RST method in acpi table in case device is behind USB or PCIe controller. So far, I studied, I only need to define a PCIe or

VFR question has attribute refresh interval (Refresh interval in seconds). It will trig call back regularly. There is one example is in edk2\MdeModulePkg\Universal\DriverSampleDxe\Vfr.vfr You can add

Tim: Yes. Refreshguid can be used in Question or Form. Can you help submit BZ to record the issue in VFR spec? Thanks Liming > -----邮件原件----- > 发件人: tosubbounce+34241+0+0+0@groups.io > <tosubbounce+34

I have made BZ 3053 for the VFR spec issue. https://bugzilla.tianocore.org/show_bug.cgi?id=3053

H I need someone help that about building UEFI Self-Certification Test 2.7B problem. From website https://www.uefi.org/testtools only provide InstallX64.efi with UEFI Self-Certification Test 2.6 A. No

Hi, I have 2 local commits in EDK-II repo. As per the steps mentioned in https://github.com/tianocore/tianocore.github.io/wiki/EDK-II-Development-Process, I am executing PatchCheck.py, but, the execut

Hi，all May I ask whether there is Community meeting recording or summary. If I miss the meeting, where can I get the content of the meeting? Thank you!

TianoCore Community Meeting Minutes - November is sent to devel and announce mail thread. Thanks Liming > -----邮件原件----- > 发件人: bounce+34241+444+4905953+8764802@groups.io > <bounce+34241+444+4905953+8

Hi All, I have a doubt about the check we have put inside IsTextShdr() . STATIC BOOLEAN IsTextShdr ( Elf_Shdr *Shdr ) { return (BOOLEAN) ((Shdr->sh_flags & (SHF_WRITE | SHF_ALLOC)) == SHF_ALLOC); } We

Using hii, add a new font, it can display string by StringToImage. When i use EFI_FONT_DISPLAY_INFO to set the font size, the characters are not displayed in the correct size. Is there any sample? EFI

Hello, I use HiiAddPackages add a font data to hii, it can display characters by StringToImage. But when set the font size by using StringToImage, input EFI_FONT_DISPLAY_INFO, the characters are not d

The latest patches to DynamicTablesPkg help generate an SSDT to meet the SBBR specification when an SPCR generation is desired. DynamicTablesPkg is useful for the non-SBBR compliant target to support

Hello Maciej Rabeda and All, I found that the Intel Ethernet Driver 24.3 is public here https://github.com/tianocore/edk2-staging/tree/Intel_UNDI I see that there is a high demand on Intel UNDI driver

Hi all， When removing -Wno-tautological-compare, there's a warning. MdeModulePkg/Library/FileExplorerLib/FileExplorer.c:850:19: warning: comparison of array 'Info->VolumeLabel' equal to a null pointer