Date 1 - 2 of 2
[edk2-devel] OVMF/QEMU shell based unit tests and writing to a virtual disk
On 10/27/20 14:26, Laszlo Ersek wrote:
Now, another option (on Linux anyway) is to loop-mount a "raw" virtualIf you trust your guest 100%, you *might* try the following:
- use a disk image file with "format=vhdx" on the QEMU command line,
- when QEMU is not running, I think you might be able to "loop-mount"
the VHDX file directly, on Windows.
Mutual exclusion remains just as important, of course.
... A reference about vhdx support:
... A reference about the pitfalls with vvfat:
On 10/22/20 20:55, Sean wrote:
Laszlo and others familiar with QEMU,This is the problem. Don't use the fat / vvfat block driver for anything
I don't even have to look at particulars; as "fat" ("vvfat") is known to
be a hack. In particular write operations should not be relied on
(either guest->host or host->guest directions). Don't expect this QEMU
feature to work as a "semihosting" (esp. "live semihosting") solution.
What's important to understand about "vvfat" is that it attempts to
*re-compose* a filesystem view from block-level operations.
*De-composing* file operations into block operations is an everyday
occurrence (that's what filesystem drivers do everywhere). But the write
direction of vvfat attempts to do the *inverse* -- it seeks to recognize
block operations and to synthesize file operations from them. If you get
lucky, it sometimes even works.
Instead, please use a regular virtual disk image in the QEMU
configuration. This disk image should not be accessed concurrently by
QEMU (= the guest) and other host-side utilities. In other words, first
format / populate the disk image on the host side, then launch QEMU.
Then in the guest UEFI shell, terminate the guest with the "reset -s"
command. Finally, once QEMU has exited, use host-side utilities to fetch
the results from the virtual disk image.
On the host side (on a Linux installation anyway), I tend to use the
"mtools" package (such as "mcopy" etc), for manipulating the contents of
disk image files. Or, more frequently, the "guestfish" program (which is
I don't know if equivalents exist on Windows.
Now, another option (on Linux anyway) is to loop-mount a "raw" virtual
disk image. This is not recommended, as it directly exposes the host
kernel's filesystem driver(s) to metadata produced by the guest. It
could trigger security issues in the host kernel.
(This is exactly what guestfish avoids, by running a separate Linux
guest -- called the "libguestfs appliance" -- on top of the virtual disk
image. The guestfish command interpreter on the host side exchanges
commands and data with the appliance over virtio-serial. If the metadata
on the disk image is malicious, it will break / exploit the *guest*
kernel in the appliance. The host-side component, the guestfish command
interpreter, only has to sanity-check the virtio-serial exchanges.)
... Earlier I've looked into "virtio-fs" support for OVMF:
however, it's very complex, and the wire format (the opcodes) are
extremely low-level and Linux specific. To the point where they directly
mirror Linux VFS system calls, and (due to lack of documentation) I
don't even understand what a big bunch of the opcodes *do*.
Earlier I had given some thought to a mapping between
EFI_SIMPLE_FILE_SYSTEM_PROTOCOL / EFI_FILE_PROTOCOL and the virtio-fs
opcodes, but when I did that, it looked like a bad fit. Virtio-fs seems
to aim at serializing *Linux guest* filesystem operations as tightly as
possble for host-side processing, and that seemed like a big obstacle
for a *UEFI guest* mapping.
In particular, EFI_SIMPLE_FILE_SYSTEM_PROTOCOL / EFI_FILE_PROTOCOL don't
really expect data and/or meta-data to change "under their feet" (-> due
to asynchronous host-side modifications). For a while I was hopeful to
expose such changes via the EFI_MEDIA_CHANGED return value. But -- alas,
I forget the details -- it seemed to turn out that the virtio-fs
interfaces wouldn't really let the EFI_SIMPLE_FILE_SYSTEM_PROTOCOL
driver, to be provided by OVMF, even *detect* the situations when it
should return EFI_SIMPLE_FILE_SYSTEM_PROTOCOL.
So, the virtio-fs driver for OVMF has been postponed indefinitely, and
the best I can recommend at the moment is to use a regular virtual disk
image file. Remember that QEMU (= guest), and the other (host-side)
utilities for manipulating the disk image, should be strictly serialized
(they should mutually exclude each other).
|1 - 2 of 2|