Do you mean: https://github.com/tianocore/edk2/blob/master/CryptoPkg/Library/BaseCryptLib/Hash/CryptSm3.c ?

Hello, May I ask whether there is a plan to support SM3 Cryptographic Hash Algorithm in EDK2.

Hello! Currently I develop OptionROM code for the custom PCIe device. In my OptionROM code I publish HII formset with some diagnostic information and configuration options for the device. The code is

Hi Felix! Thanks for the response! I was able to solve my problem using the `GetGlyph` function from the `gEfiHiiFontProtocolGuid` protocol. This function can return a `Blt` of the glyph. Here is

Hi Dang Luu, I think you can check the TPM specification in the section NV Index Deletion 37.2.3 (https://trustedcomputinggroup.org/wp-content/uploads/TCG_TPM2_r1p59_Part1_Architecture_pub.pdf).

There is no standard way to query platform glyph styles. Overall, list of supported languages is typically a property of the system firmware. If system firmware does not support the language you need,

Hello! Currently I develop an OptionROM for a custom PCI-E device. In this OptionROM I want to publish a HII form for the device configuration. Therefore I use the "HiiAddPackages" in the

Hi everyone, I want to find a way to delete the TPM NV index that I was provisioned before. I have found a function Tpm2NvUndefineSpaceSpecial() on EDK2 open source but I still don't know how to

Hi Palanivel, Please follow the steps in https://github.com/vlsunil/riscv-uefi-edk2-docs/wiki/RISC-V-Qemu-Virt-support Let me know how it goes! Thanks Sunil

Hi Palanivel, Could you follow the instructions at https://github.com/riscv-admin/riscv-uefi-edk2-docs/blob/master/README.md I am not the maintainer of this SoC. But let me know if you see

Greeting EDK2 team, I have cloned EDK2 code from git clone https://github.com/tianocore/edk2.git and running code in qemu. Could you please guide me in which part of code of EDK2, I need to

Quick question for everyone: Are the group messages landing correctly into your inbox or are they landing in SPAM. I have reports that many communications are landing in SPAM. I just need to see if

I had lots that were landing in my Spam folder yesterday, but it seemed to get resolved around 8pm MST last night. I sent a message about it last night, "Several messages todevel@edk2.groups.io (from

It seems the change Sean was talking about is [1]. Sean, if you're too busy and it's okay with you, I am willing to put in the effort of adaping this change for EDK2. Thanks, -Jan References: 1.

Thanks, Sunil. Linux boots with this firmware on 'virt' machine. Regards, Palanivel ________________________________ Sent: 12 January 2023 19:16 To: Palanivel Duraisamy

Hi Sunil, I followed the given instructions in the document. I am getting UEFI shell prompt. The document says the following commands(step 6) need to be run on uefi shell. FS0 has the

[AMD Official Use Only - General] Hi Palanivel, U540 should be able to boot to kernel if follow the steps mentioned in https://github.com/riscv-admin/riscv-uefi-edk2-docs, everything was fine back

Hi, I am trying to boot Linux Kernel with statically linked initramfs on QEMU-riscv64 target. I followed the steps provided in the link "https://github.com/riscv-admin/riscv-uefi-edk2-docs". Built

Hi, I'm trying to build EDK2 follow this wiki: https://github.com/tianocore/tianocore.github.io/wiki/How-to-Build-With-Stuart . But when I run stuart_setup -c .pytool/CISettings.py , it

Hello I have read https://bugzilla.tianocore.org/show_bug.cgi?id=2506 and https://edk2.groups.io/g/devel/topic/32283314#43150. That seems make sense to me. Would you please send out the patch set, we