Re: Linux booting issue with edk2 uefi on riscv64 qemu


Palanivel Duraisamy
 

Thanks, Sunil.

Linux boots with this firmware on 'virt' machine.

Regards,
Palanivel
________________________________
From: Sunil V L <sunilvl@...>
Sent: 12 January 2023 19:16
To: Palanivel Duraisamy <Palanivel.d@...>
Cc: discuss@edk2.groups.io <discuss@edk2.groups.io>
Subject: Re: [edk2-discuss] Linux booting issue with edk2 uefi on riscv64 qemu

Hi Palanivel,

Please follow the steps in
https://github.com/vlsunil/riscv-uefi-edk2-docs/wiki/RISC-V-Qemu-Virt-support

Let me know how it goes!

Thanks
Sunil

On Thu, Jan 12, 2023 at 07:43:53AM +0000, Palanivel Duraisamy wrote:
Hi Sunil,

I followed the given instructions in the document.
I am getting UEFI shell prompt.
The document says the following commands(step 6) need to be run on uefi shell.
FS0 has the linux-riscv64.elf file.

embeddedramdisk 4f2f3d7b-35ef-411b-9d26-e76ecacbaf8b
map -r
fs0:

The "embbedramdisk" command in my setup fails.
I think this command is missing and some modifications in EDK2 are needed to add this command.

I am ok with "virt" machine type.

Thanks
Palanivel
________________________________
From: Sunil V L <sunilvl@...>
Sent: 11 January 2023 20:55
To: discuss@edk2.groups.io <discuss@edk2.groups.io>; Palanivel Duraisamy <Palanivel.d@...>
Subject: Re: [edk2-discuss] Linux booting issue with edk2 uefi on riscv64 qemu

Hi Palanivel,

Could you follow the instructions at
https://github.com/riscv-admin/riscv-uefi-edk2-docs/blob/master/README.md

I am not the maintainer of this SoC. But let me know if you see any
issues. I will try to help.

Having said that, there is a series I am working on to support qemu virt
machine which is not yet merged. If you are fine with "virt" machine
instead of U540, let me know. It has latest design and supports disks
similar to other architectures.

Regards
Sunil

On Mon, Jan 09, 2023 at 11:39:38PM -0800, Palanivel Duraisamy wrote:
Hi,

I am trying to boot Linux Kernel with statically linked initramfs on QEMU-riscv64 target.
I followed the steps provided in the link "https://github.com/riscv-admin/riscv-uefi-edk2-docs".
Built firmware for u540 board using the command "build -a RISCV64 -p Platform/SiFive/U5SeriesPkg/FreedomU540HiFiveUnleashedBoard/U540.dsc -t GCC5".
Ran the command "qemu-system-riscv64 -cpu sifive-u54 -machine sifive_u -bios U540.fd" to boot Linux.
I am getting uefi shell prompt. The uefi map commands gives "map: No mapping found." error.

I would like to know the procedure to bring up Linux with UEFI firmware.

Regards
Palanivel




[EXT]
[EXT]

Join {discuss@edk2.groups.io to automatically receive all group messages.