REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3D3926
This API accept one parameter using RCX and this is consumed
in mutiple sub functions.

Cc: Chasel Chiu <chasel.chiu@...>
Cc: Nate DeSimone <nathaniel.l.desimone@...>
Cc: Star Zeng <star.zeng@...>
Cc: Ashraf Ali S <ashraf.ali.s@...>
Signed-off-by: cbduggap <chinni.b.duggapu@...>
---
IntelFsp2Pkg/FspSecCore/X64/FspApiEntryT.nasm | 39 ++++++++++---------
.../Include/SaveRestoreSseAvxNasm.inc | 28 +++++++++++++
2 files changed, 48 insertions(+), 19 deletions(-)

diff --git a/IntelFsp2Pkg/FspSecCore/X64/FspApiEntryT.nasm b/IntelFsp2Pkg/F=
spSecCore/X64/FspApiEntryT.nasm
index a9f5f28ed7..22dbea1fed 100644
--- a/IntelFsp2Pkg/FspSecCore/X64/FspApiEntryT.nasm
+++ b/IntelFsp2Pkg/FspSecCore/X64/FspApiEntryT.nasm
@@ -114,7 +114,7 @@ endstruc
global ASM_PFX(LoadMicrocodeDefault)=0D
ASM_PFX(LoadMicrocodeDefault):=0D
; Inputs:=0D
- ; rsp -> LoadMicrocodeParams pointer=0D
+ ; rcx -> LoadMicrocodeParams pointer=0D
; Register Usage:=0D
; rsp Preserved=0D
; All others destroyed=0D
@@ -130,10 +130,9 @@ ASM_PFX(LoadMicrocodeDefault):
=0D
cmp rsp, 0=0D
jz ParamError=0D
- mov eax, dword [rsp + 8] ; Parameter pointer=0D
- cmp eax, 0=0D
+ cmp rcx, 0=0D
jz ParamError=0D
- mov esp, eax=0D
+ mov rsp, rcx=0D
=0D
; skip loading Microcode if the MicrocodeCodeSize is zero=0D
; and report error if size is less than 2k=0D
@@ -144,14 +143,14 @@ ASM_PFX(LoadMicrocodeDefault):
jne ParamError=0D
=0D
; UPD structure is compliant with FSP spec 2.4=0D
- mov eax, dword [rsp + LoadMicrocodeParamsFsp24.MicrocodeCodeSize]=0D
- cmp eax, 0=0D
+ mov rax, qword [rsp + LoadMicrocodeParamsFsp24.MicrocodeCodeSize]=0D
+ cmp rax, 0=0D
jz Exit2=0D
- cmp eax, 0800h=0D
+ cmp rax, 0800h=0D
jl ParamError=0D
=0D
- mov esi, dword [rsp + LoadMicrocodeParamsFsp24.MicrocodeCodeAddr]=0D
- cmp esi, 0=0D
+ mov rsi, qword [rsp + LoadMicrocodeParamsFsp24.MicrocodeCodeAddr]=0D
+ cmp rsi, 0=0D
jnz CheckMainHeader=0D
=0D
ParamError:=0D
@@ -256,7 +255,8 @@ CheckAddress:
; UPD structure is compliant with FSP spec 2.4=0D
; Is automatic size detection ?=0D
mov rax, qword [rsp + LoadMicrocodeParamsFsp24.MicrocodeCodeSize]=0D
- cmp rax, 0ffffffffffffffffh=0D
+ cmp rcx, 0ffffffffffffffffh=0D
+ cmp rax, rcx=0D
jz LoadMicrocodeDefault4=0D
=0D
; Address >=3D microcode region address + microcode region size?=0D
@@ -321,8 +321,7 @@ ASM_PFX(EstablishStackFsp):
;=0D
; Save parameter pointer in rdx=0D
;=0D
- mov rdx, qword [rsp + 8]=0D
-=0D
+ mov rdx, rcx=0D
;=0D
; Enable FSP STACK=0D
;=0D
@@ -420,7 +419,10 @@ ASM_PFX(TempRamInitApi):
;=0D
ENABLE_SSE=0D
ENABLE_AVX=0D
-=0D
+ ;=0D
+ ; Save Input Parameter in YMM10=0D
+ ;=0D
+ SAVE_RCX=0D
;=0D
; Save RBP, RBX, RSI, RDI and RSP in YMM7, YMM8 and YMM6=0D
;=0D
@@ -442,9 +444,8 @@ ASM_PFX(TempRamInitApi):
;=0D
; Check Parameter=0D
;=0D
- mov rax, qword [rsp + 8]=0D
- cmp rax, 0=0D
- mov rax, 08000000000000002h=0D
+ cmp rcx, 0=0D
+ mov rcx, 08000000000000002h=0D
jz TempRamInitExit=0D
=0D
;=0D
@@ -455,18 +456,18 @@ ASM_PFX(TempRamInitApi):
jnz TempRamInitExit=0D
=0D
; Load microcode=0D
- LOAD_RSP=0D
+ LOAD_RCX=0D
CALL_YMM ASM_PFX(LoadMicrocodeDefault)=0D
SAVE_UCODE_STATUS rax ; Save microcode return status in SLOT=
0 in YMM9 (upper 128bits).=0D
; @note If return value rax is not 0, microcode did not load, but contin=
ue and attempt to boot.=0D
=0D
; Call Sec CAR Init=0D
- LOAD_RSP=0D
+ LOAD_RCX=0D
CALL_YMM ASM_PFX(SecCarInit)=0D
cmp rax, 0=0D
jnz TempRamInitExit=0D
=0D
- LOAD_RSP=0D
+ LOAD_RCX=0D
CALL_YMM ASM_PFX(EstablishStackFsp)=0D
cmp rax, 0=0D
jnz TempRamInitExit=0D
diff --git a/IntelFsp2Pkg/Include/SaveRestoreSseAvxNasm.inc b/IntelFsp2Pkg/=
Include/SaveRestoreSseAvxNasm.inc
index e8bd91669d..38c807a311 100644
--- a/IntelFsp2Pkg/Include/SaveRestoreSseAvxNasm.inc
+++ b/IntelFsp2Pkg/Include/SaveRestoreSseAvxNasm.inc
@@ -177,6 +177,30 @@
LXMMN xmm5, %1, 1=0D
%endmacro=0D
=0D
+;=0D
+; Upper half of YMM10 to save/restore RCX=0D
+;=0D
+;=0D
+; Save RCX to YMM10[128:191]=0D
+; Modified: XMM5 and YMM10=0D
+;=0D
+=0D
+%macro SAVE_RCX 0=0D
+ LYMMN ymm10, xmm5, 1=0D
+ SXMMN xmm5, 0, rcx=0D
+ SYMMN ymm10, 1, xmm5=0D
+ %endmacro=0D
+=0D
+;=0D
+; Restore RCX from YMM10[128:191]=0D
+; Modified: XMM5 and RCX=0D
+;=0D
+=0D
+%macro LOAD_RCX 0=0D
+ LYMMN ymm10, xmm5, 1=0D
+ movq rcx, xmm5=0D
+ %endmacro=0D
+=0D
;=0D
; YMM7[128:191] for calling stack=0D
; arg 1:Entry=0D
@@ -231,6 +255,7 @@ NextAddress:
; Use CpuId instruction (CPUID.01H:EDX.SSE[bit 25] =3D 1) to t=
est=0D
; whether the processor supports SSE instruction.=0D
;=0D
+ mov r10, rcx=0D
mov rax, 1=0D
cpuid=0D
bt rdx, 25=0D
@@ -241,6 +266,7 @@ NextAddress:
;=0D
bt ecx, 19=0D
jnc SseError=0D
+ mov rcx, r10=0D
=0D
;=0D
; Set OSFXSR bit (bit #9) & OSXMMEXCPT bit (bit #10)=0D
@@ -258,6 +284,7 @@ NextAddress:
%endmacro=0D
=0D
%macro ENABLE_AVX 0=0D
+ mov r10, rcx=0D
mov eax, 1=0D
cpuid=0D
and ecx, 10000000h=0D
@@ -280,5 +307,6 @@ EnableAvx:
xgetbv ; result in edx:eax=0D
or eax, 00000006h ; Set XCR0 bit #1 and bit #2 to enable =
SSE state and AVX state=0D
xsetbv=0D
+ mov rcx, r10=0D
%endmacro=0D
=0D
--=20
2.36.0.windows.1

Thanks Chinni!
Reviewed-by: Chasel Chiu <chasel.chiu@...>