[PATCH v2 8/8] DynamicTablesPkg: IORT generator updates for Rev E.b spec


PierreGondois
 

Hi Sami,

With the small modification:

Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>

On 6/17/21 10:55, Sami Mujawar via groups.io wrote:
Bugzilla: 3458 - Add support IORT Rev E.b specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)

The IO Remapping Table, Platform Design Document, Revision E.b,
Feb 2021 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E and Rev E.a:
- increments the IORT table revision to 3.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.

Therefore, update the IORT generator to:
- increment IORT table revision count to 3.
- populate Identifier filed if revision is greater than 2.
- add support to populate Reserved Memory Range nodes and
the Memory range descriptors.
- add validation to check that the Identifier field is
unique.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
---

Notes:
v2:
- The macro EFI_ACPI_IO_REMAPPING_TABLE_REVISION was set to [SAMI]
Rev 0 as setting to Rev 3 will break existing platforms.
Therefore, set the max supported IORT generator revision
to 3.

DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c | 661 ++++++++++++++++++--
DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.h | 5 +-
2 files changed, 624 insertions(+), 42 deletions(-)

diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
index 9ccf72594db378878d4e3abbafe98e749d9963da..9b687f0165e6136f2f24749d27dee27edaff1b31 100644
--- a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
@@ -5,8 +5,8 @@
SPDX-License-Identifier: BSD-2-Clause-Patent

@par Reference(s):
- - IO Remapping Table, Platform Design Document,
- Document number: ARM DEN 0049D, Issue D, March 2018
+ - IO Remapping Table, Platform Design Document, Revision E.b, Feb 2021
+ (https://developer.arm.com/documentation/den0049/)

**/
[snip]
+
// Ids for SMMUv3 node
IdMapArray = (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE*)((UINT8*)SmmuV3Node +
SmmuV3Node->Node.IdReference);
@@ -1417,6 +1616,7 @@ AddSmmuV3Nodes (
@param [in] This Pointer to the table Generator.
@param [in] CfgMgrProtocol Pointer to the Configuration Manager
Protocol Interface.
+ @param [in] AcpiTableInfo Pointer to the ACPI table info structure.
@param [in] Iort Pointer to IORT table structure.
@param [in] NodesStartOffset Offset for the start of the PMCG Nodes.
@param [in] NodeList Pointer to an array of PMCG Node Objects.
@@ -1431,6 +1631,7 @@ EFI_STATUS
AddPmcgNodes (
IN CONST ACPI_TABLE_GENERATOR * CONST This,
IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
IN CONST EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort,
IN CONST UINT32 NodesStartOffset,
IN CONST CM_ARM_PMCG_NODE * NodeList,
@@ -1465,12 +1666,18 @@ AddPmcgNodes (
// Populate the node header
PmcgNode->Node.Type = EFI_ACPI_IORT_TYPE_PMCG;
PmcgNode->Node.Length = (UINT16)NodeLength;
- PmcgNode->Node.Revision = 1;
- PmcgNode->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
PmcgNode->Node.NumIdMappings = NodeList->IdMappingCount;
PmcgNode->Node.IdReference = (NodeList->IdMappingCount == 0) ?
0 : sizeof (EFI_ACPI_6_0_IO_REMAPPING_PMCG_NODE);

+ if (AcpiTableInfo->AcpiTableRevision < EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ PmcgNode->Node.Revision = 1;
+ PmcgNode->Node.Identifier = EFI_ACPI_RESERVED_DWORD;
+ } else {
+ PmcgNode->Node.Revision = 2;
+ PmcgNode->Node.Identifier = NodeList->Identifier;
+ }
+
// PMCG specific data
PmcgNode->Base = NodeList->BaseAddress;
PmcgNode->OverflowInterruptGsiv = NodeList->OverflowInterrupt;
@@ -1494,8 +1701,19 @@ AddPmcgNodes (
return Status;
}

- if ((NodeList->IdMappingCount > 0) &&
- (NodeList->IdMappingToken != CM_NULL_TOKEN)) {
+ if (NodeList->IdMappingCount > 0) {
+ if (NodeList->IdMappingToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Id Mapping token,"
+ " Token = 0x%x, Status =%r\n",
+ NodeList->IdMappingToken,
+ Status
+ ));
+ return Status;
+ }
+
As this is not related to the RevE spec update, could it be done in:

[PATCH v2 6/8] DynamicTablesPkg: IORT set reference to interrupt array
if present

This is also done at other places.

// Ids for PMCG node
IdMapArray = (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE*)((UINT8*)PmcgNode +
PmcgNode->Node.IdReference);
@@ -1526,6 +1744,273 @@ AddPmcgNodes (
return EFI_SUCCESS;
}
[snip]

Regards,

Pierre


Sami Mujawar
 

Bugzilla: 3458 - Add support IORT Rev E.b specification updates
(https://bugzilla.tianocore.org/show_bug.cgi?id=3458)

The IO Remapping Table, Platform Design Document, Revision E.b,
Feb 2021 (https://developer.arm.com/documentation/den0049/)
introduces the following updates, collectively including the
updates and errata fixes to Rev E and Rev E.a:
- increments the IORT table revision to 3.
- updates the node definition to add an 'Identifier' field.
- adds definition of node type 6 - Reserved Memory Range node.
- adds definition for Memory Range Descriptors.
- adds flag to indicate PRI support for root complexes.
- adds flag to indicate if the root complex supports forwarding
of PASID information on translated transactions to the SMMU.

Therefore, update the IORT generator to:
- increment IORT table revision count to 3.
- populate Identifier filed if revision is greater than 2.
- add support to populate Reserved Memory Range nodes and
the Memory range descriptors.
- add validation to check that the Identifier field is
unique.

Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
---

Notes:
v2:
- The macro EFI_ACPI_IO_REMAPPING_TABLE_REVISION was set to [SAMI]
Rev 0 as setting to Rev 3 will break existing platforms.
Therefore, set the max supported IORT generator revision
to 3.

DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c | 661 ++++++++++++++++++--
DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.h | 5 +-
2 files changed, 624 insertions(+), 42 deletions(-)

diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
index 9ccf72594db378878d4e3abbafe98e749d9963da..9b687f0165e6136f2f24749d27dee27edaff1b31 100644
--- a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.c
@@ -5,8 +5,8 @@
SPDX-License-Identifier: BSD-2-Clause-Patent

@par Reference(s):
- - IO Remapping Table, Platform Design Document,
- Document number: ARM DEN 0049D, Issue D, March 2018
+ - IO Remapping Table, Platform Design Document, Revision E.b, Feb 2021
+ (https://developer.arm.com/documentation/den0049/)

**/

@@ -37,9 +37,11 @@ Requirements:
- EArmObjSmmuV1SmmuV2
- EArmObjSmmuV3
- EArmObjPmcg
+ - EArmObjRmr
- EArmObjGicItsIdentifierArray
- EArmObjIdMappingArray
- - EArmObjGicItsIdentifierArray
+ - EArmObjSmmuInterruptArray
+ - EArmObjMemoryRangeDescriptor
*/

/** This macro expands to a function that retrieves the ITS
@@ -96,6 +98,24 @@ GET_OBJECT_LIST (
CM_ARM_PMCG_NODE
);

+/** This macro expands to a function that retrieves the
+ RMR node information from the Configuration Manager.
+*/
+GET_OBJECT_LIST (
+ EObjNameSpaceArm,
+ EArmObjRmr,
+ CM_ARM_RMR_NODE
+ );
+
+/** This macro expands to a function that retrieves the
+ Memory Range Descriptor Array information from the Configuration Manager.
+*/
+GET_OBJECT_LIST (
+ EObjNameSpaceArm,
+ EArmObjMemoryRangeDescriptor,
+ CM_ARM_MEMORY_RANGE_DESCRIPTOR
+ );
+
/** This macro expands to a function that retrieves the
ITS Identifier Array information from the Configuration Manager.
*/
@@ -177,13 +197,16 @@ GetSizeofItsGroupNodes (
(*NodeIndexer)->Token = NodeList->Token;
(*NodeIndexer)->Object = (VOID*)NodeList;
(*NodeIndexer)->Offset = (UINT32)(Size + NodeStartOffset);
+ (*NodeIndexer)->Identifier = NodeList->Identifier;
DEBUG ((
DEBUG_INFO,
- "IORT: Node Indexer = %p, Token = %p, Object = %p, Offset = 0x%x\n",
+ "IORT: Node Indexer = %p, Token = %p, Object = %p,"
+ " Offset = 0x%x, Identifier = 0x%x\n",
*NodeIndexer,
(*NodeIndexer)->Token,
(*NodeIndexer)->Object,
- (*NodeIndexer)->Offset
+ (*NodeIndexer)->Offset,
+ (*NodeIndexer)->Identifier
));

Size += GetItsGroupNodeSize (NodeList);
@@ -250,13 +273,16 @@ GetSizeofNamedComponentNodes (
(*NodeIndexer)->Token = NodeList->Token;
(*NodeIndexer)->Object = (VOID*)NodeList;
(*NodeIndexer)->Offset = (UINT32)(Size + NodeStartOffset);
+ (*NodeIndexer)->Identifier = NodeList->Identifier;
DEBUG ((
DEBUG_INFO,
- "IORT: Node Indexer = %p, Token = %p, Object = %p, Offset = 0x%x\n",
+ "IORT: Node Indexer = %p, Token = %p, Object = %p,"
+ " Offset = 0x%x, Identifier = 0x%x\n",
*NodeIndexer,
(*NodeIndexer)->Token,
(*NodeIndexer)->Object,
- (*NodeIndexer)->Offset
+ (*NodeIndexer)->Offset,
+ (*NodeIndexer)->Identifier
));

Size += GetNamedComponentNodeSize (NodeList);
@@ -322,13 +348,16 @@ GetSizeofRootComplexNodes (
(*NodeIndexer)->Token = NodeList->Token;
(*NodeIndexer)->Object = (VOID*)NodeList;
(*NodeIndexer)->Offset = (UINT32)(Size + NodeStartOffset);
+ (*NodeIndexer)->Identifier = NodeList->Identifier;
DEBUG ((
DEBUG_INFO,
- "IORT: Node Indexer = %p, Token = %p, Object = %p, Offset = 0x%x\n",
+ "IORT: Node Indexer = %p, Token = %p, Object = %p,"
+ " Offset = 0x%x, Identifier = 0x%x\n",
*NodeIndexer,
(*NodeIndexer)->Token,
(*NodeIndexer)->Object,
- (*NodeIndexer)->Offset
+ (*NodeIndexer)->Offset,
+ (*NodeIndexer)->Identifier
));

Size += GetRootComplexNodeSize (NodeList);
@@ -400,13 +429,16 @@ GetSizeofSmmuV1V2Nodes (
(*NodeIndexer)->Token = NodeList->Token;
(*NodeIndexer)->Object = (VOID*)NodeList;
(*NodeIndexer)->Offset = (UINT32)(Size + NodeStartOffset);
+ (*NodeIndexer)->Identifier = NodeList->Identifier;
DEBUG ((
DEBUG_INFO,
- "IORT: Node Indexer = %p, Token = %p, Object = %p, Offset = 0x%x\n",
+ "IORT: Node Indexer = %p, Token = %p, Object = %p,"
+ " Offset = 0x%x, Identifier = 0x%x\n",
*NodeIndexer,
(*NodeIndexer)->Token,
(*NodeIndexer)->Object,
- (*NodeIndexer)->Offset
+ (*NodeIndexer)->Offset,
+ (*NodeIndexer)->Identifier
));

Size += GetSmmuV1V2NodeSize (NodeList);
@@ -471,13 +503,16 @@ GetSizeofSmmuV3Nodes (
(*NodeIndexer)->Token = NodeList->Token;
(*NodeIndexer)->Object = (VOID*)NodeList;
(*NodeIndexer)->Offset = (UINT32)(Size + NodeStartOffset);
+ (*NodeIndexer)->Identifier = NodeList->Identifier;
DEBUG ((
DEBUG_INFO,
- "IORT: Node Indexer = %p, Token = %p, Object = %p, Offset = 0x%x\n",
+ "IORT: Node Indexer = %p, Token = %p, Object = %p,"
+ " Offset = 0x%x, Identifier = 0x%x\n",
*NodeIndexer,
(*NodeIndexer)->Token,
(*NodeIndexer)->Object,
- (*NodeIndexer)->Offset
+ (*NodeIndexer)->Offset,
+ (*NodeIndexer)->Identifier
));

Size += GetSmmuV3NodeSize (NodeList);
@@ -542,13 +577,16 @@ GetSizeofPmcgNodes (
(*NodeIndexer)->Token = NodeList->Token;
(*NodeIndexer)->Object = (VOID*)NodeList;
(*NodeIndexer)->Offset = (UINT32)(Size + NodeStartOffset);
+ (*NodeIndexer)->Identifier = NodeList->Identifier;
DEBUG ((
DEBUG_INFO,
- "IORT: Node Indexer = %p, Token = %p, Object = %p, Offset = 0x%x\n",
+ "IORT: Node Indexer = %p, Token = %p, Object = %p,"
+ " Offset = 0x%x, Identifier = 0x%x\n",
*NodeIndexer,
(*NodeIndexer)->Token,
(*NodeIndexer)->Object,
- (*NodeIndexer)->Offset
+ (*NodeIndexer)->Offset,
+ (*NodeIndexer)->Identifier
));

Size += GetPmcgNodeSize (NodeList);
@@ -558,6 +596,83 @@ GetSizeofPmcgNodes (
return Size;
}

+/** Returns the size of the RMR node.
+
+ @param [in] Node Pointer to RMR node.
+
+ @retval Size of the RMR node.
+**/
+STATIC
+UINT32
+GetRmrNodeSize (
+ IN CONST CM_ARM_RMR_NODE * Node
+ )
+{
+ ASSERT (Node != NULL);
+
+ /* Size of RMR node +
+ Size of ID mapping array +
+ Size of Memory Range Descriptor array
+ */
+ return (UINT32)(sizeof (EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE) +
+ (Node->IdMappingCount *
+ sizeof (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE)) +
+ (Node->MemRangeDescCount *
+ sizeof (EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC)));
+}
+
+/** Returns the total size required for the RMR nodes and
+ updates the Node Indexer.
+
+ This function calculates the size required for the node group
+ and also populates the Node Indexer array with offsets for the
+ individual nodes.
+
+ @param [in] NodeStartOffset Offset from the start of the
+ IORT where this node group starts.
+ @param [in] NodeList Pointer to RMR node list.
+ @param [in] NodeCount Count of the RMR nodes.
+ @param [in, out] NodeIndexer Pointer to the next Node Indexer.
+
+ @retval Total size of the RMR nodes.
+**/
+STATIC
+UINT64
+GetSizeofRmrNodes (
+ IN CONST UINT32 NodeStartOffset,
+ IN CONST CM_ARM_RMR_NODE * NodeList,
+ IN UINT32 NodeCount,
+ IN OUT IORT_NODE_INDEXER ** CONST NodeIndexer
+ )
+{
+ UINT64 Size;
+
+ ASSERT (NodeList != NULL);
+
+ Size = 0;
+ while (NodeCount-- != 0) {
+ (*NodeIndexer)->Token = NodeList->Token;
+ (*NodeIndexer)->Object = (VOID*)NodeList;
+ (*NodeIndexer)->Offset = (UINT32)(Size + NodeStartOffset);
+ (*NodeIndexer)->Identifier = NodeList->Identifier;
+ DEBUG ((
+ DEBUG_INFO,
+ "IORT: Node Indexer = %p, Token = %p, Object = %p,"
+ " Offset = 0x%x, Identifier = 0x%x\n",
+ *NodeIndexer,
+ (*NodeIndexer)->Token,
+ (*NodeIndexer)->Object,
+ (*NodeIndexer)->Offset,
+ (*NodeIndexer)->Identifier
+ ));
+
+ Size += GetRmrNodeSize (NodeList);
+ (*NodeIndexer)++;
+ NodeList++;
+ }
+ return Size;
+}
+
/** Returns the offset of the Node referenced by the Token.

@param [in] NodeIndexer Pointer to node indexer array.
@@ -707,6 +822,7 @@ AddIdMappingArray (
@param [in] This Pointer to the table Generator.
@param [in] CfgMgrProtocol Pointer to the Configuration Manager
Protocol Interface.
+ @param [in] AcpiTableInfo Pointer to the ACPI table info structure.
@param [in] Iort Pointer to IORT table structure.
@param [in] NodesStartOffset Offset for the start of the ITS Group
Nodes.
@@ -723,6 +839,7 @@ EFI_STATUS
AddItsGroupNodes (
IN CONST ACPI_TABLE_GENERATOR * CONST This,
IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
IN CONST EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort,
IN CONST UINT32 NodesStartOffset,
IN CONST CM_ARM_ITS_GROUP_NODE * NodeList,
@@ -759,11 +876,17 @@ AddItsGroupNodes (
// Populate the node header
ItsGroupNode->Node.Type = EFI_ACPI_IORT_TYPE_ITS_GROUP;
ItsGroupNode->Node.Length = (UINT16)NodeLength;
- ItsGroupNode->Node.Revision = 0;
- ItsGroupNode->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
ItsGroupNode->Node.NumIdMappings = 0;
ItsGroupNode->Node.IdReference = 0;

+ if (AcpiTableInfo->AcpiTableRevision < EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ ItsGroupNode->Node.Revision = 0;
+ ItsGroupNode->Node.Identifier = EFI_ACPI_RESERVED_DWORD;
+ } else {
+ ItsGroupNode->Node.Revision = 1;
+ ItsGroupNode->Node.Identifier = NodeList->Identifier;
+ }
+
// IORT specific data
ItsGroupNode->NumItsIdentifiers = NodeList->ItsIdCount;
ItsIds = (UINT32*)((UINT8*)ItsGroupNode +
@@ -814,6 +937,7 @@ AddItsGroupNodes (
@param [in] This Pointer to the table Generator.
@param [in] CfgMgrProtocol Pointer to the Configuration Manager
Protocol Interface.
+ @param [in] AcpiTableInfo Pointer to the ACPI table info structure.
@param [in] Iort Pointer to IORT table structure.
@param [in] NodesStartOffset Offset for the start of the Named
Component Nodes.
@@ -830,6 +954,7 @@ EFI_STATUS
AddNamedComponentNodes (
IN CONST ACPI_TABLE_GENERATOR * CONST This,
IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
IN CONST EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort,
IN CONST UINT32 NodesStartOffset,
IN CONST CM_ARM_NAMED_COMPONENT_NODE * NodeList,
@@ -865,10 +990,16 @@ AddNamedComponentNodes (
// Populate the node header
NcNode->Node.Type = EFI_ACPI_IORT_TYPE_NAMED_COMP;
NcNode->Node.Length = (UINT16)NodeLength;
- NcNode->Node.Revision = 2;
- NcNode->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
NcNode->Node.NumIdMappings = NodeList->IdMappingCount;

+ if (AcpiTableInfo->AcpiTableRevision < EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ NcNode->Node.Revision = 2;
+ NcNode->Node.Identifier = EFI_ACPI_RESERVED_DWORD;
+ } else {
+ NcNode->Node.Revision = 4;
+ NcNode->Node.Identifier = NodeList->Identifier;
+ }
+
ObjectNameLength = AsciiStrLen (NodeList->ObjectName) + 1;
NcNode->Node.IdReference = (NodeList->IdMappingCount == 0) ?
0 : ((UINT32)(sizeof (EFI_ACPI_6_0_IO_REMAPPING_NAMED_COMP_NODE) +
@@ -899,8 +1030,19 @@ AddNamedComponentNodes (
return Status;
}

- if ((NodeList->IdMappingCount > 0) &&
- (NodeList->IdMappingToken != CM_NULL_TOKEN)) {
+ if (NodeList->IdMappingCount > 0) {
+ if (NodeList->IdMappingToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Id Mapping token,"
+ " Token = 0x%x, Status =%r\n",
+ NodeList->IdMappingToken,
+ Status
+ ));
+ return Status;
+ }
+
// Ids for Named Component
IdMapArray = (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE*)((UINT8*)NcNode +
NcNode->Node.IdReference);
@@ -938,6 +1080,7 @@ AddNamedComponentNodes (
@param [in] This Pointer to the table Generator.
@param [in] CfgMgrProtocol Pointer to the Configuration Manager
Protocol Interface.
+ @param [in] AcpiTableInfo Pointer to the ACPI table info structure.
@param [in] Iort Pointer to IORT table structure.
@param [in] NodesStartOffset Offset for the start of the Root Complex
Nodes.
@@ -954,6 +1097,7 @@ EFI_STATUS
AddRootComplexNodes (
IN CONST ACPI_TABLE_GENERATOR * CONST This,
IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
IN CONST EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort,
IN CONST UINT32 NodesStartOffset,
IN CONST CM_ARM_ROOT_COMPLEX_NODE * NodeList,
@@ -987,12 +1131,18 @@ AddRootComplexNodes (
// Populate the node header
RcNode->Node.Type = EFI_ACPI_IORT_TYPE_ROOT_COMPLEX;
RcNode->Node.Length = (UINT16)NodeLength;
- RcNode->Node.Revision = 1;
- RcNode->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
RcNode->Node.NumIdMappings = NodeList->IdMappingCount;
RcNode->Node.IdReference = (NodeList->IdMappingCount == 0) ?
0 : sizeof (EFI_ACPI_6_0_IO_REMAPPING_RC_NODE);

+ if (AcpiTableInfo->AcpiTableRevision < EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ RcNode->Node.Revision = 1;
+ RcNode->Node.Identifier = EFI_ACPI_RESERVED_DWORD;
+ } else {
+ RcNode->Node.Revision = 3;
+ RcNode->Node.Identifier = NodeList->Identifier;
+ }
+
// Root Complex specific data
RcNode->CacheCoherent = NodeList->CacheCoherent;
RcNode->AllocationHints = NodeList->AllocationHints;
@@ -1005,8 +1155,19 @@ AddRootComplexNodes (
RcNode->Reserved1[1] = EFI_ACPI_RESERVED_BYTE;
RcNode->Reserved1[2] = EFI_ACPI_RESERVED_BYTE;

- if ((NodeList->IdMappingCount > 0) &&
- (NodeList->IdMappingToken != CM_NULL_TOKEN)) {
+ if (NodeList->IdMappingCount > 0) {
+ if (NodeList->IdMappingToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Id Mapping token,"
+ " Token = 0x%x, Status =%r\n",
+ NodeList->IdMappingToken,
+ Status
+ ));
+ return Status;
+ }
+
// Ids for Root Complex
IdMapArray = (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE*)((UINT8*)RcNode +
RcNode->Node.IdReference);
@@ -1107,6 +1268,7 @@ AddSmmuInterruptArray (
@param [in] This Pointer to the table Generator.
@param [in] CfgMgrProtocol Pointer to the Configuration Manager
Protocol Interface.
+ @param [in] AcpiTableInfo Pointer to the ACPI table info structure.
@param [in] Iort Pointer to IORT table structure.
@param [in] NodesStartOffset Offset for the start of the SMMU v1/v2
Nodes.
@@ -1123,6 +1285,7 @@ EFI_STATUS
AddSmmuV1V2Nodes (
IN CONST ACPI_TABLE_GENERATOR * CONST This,
IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
IN CONST EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort,
IN CONST UINT32 NodesStartOffset,
IN CONST CM_ARM_SMMUV1_SMMUV2_NODE * NodeList,
@@ -1159,8 +1322,6 @@ AddSmmuV1V2Nodes (
// Populate the node header
SmmuNode->Node.Type = EFI_ACPI_IORT_TYPE_SMMUv1v2;
SmmuNode->Node.Length = (UINT16)NodeLength;
- SmmuNode->Node.Revision = 0;
- SmmuNode->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
SmmuNode->Node.NumIdMappings = NodeList->IdMappingCount;
SmmuNode->Node.IdReference = (NodeList->IdMappingCount == 0) ?
0 : (sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU_NODE) +
@@ -1169,6 +1330,14 @@ AddSmmuV1V2Nodes (
(NodeList->PmuInterruptCount *
sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU_INT)));

+ if (AcpiTableInfo->AcpiTableRevision < EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ SmmuNode->Node.Revision = 1;
+ SmmuNode->Node.Identifier = EFI_ACPI_RESERVED_DWORD;
+ } else {
+ SmmuNode->Node.Revision = 3;
+ SmmuNode->Node.Identifier = NodeList->Identifier;
+ }
+
// SMMU v1/v2 specific data
SmmuNode->Base = NodeList->BaseAddress;
SmmuNode->Span = NodeList->Span;
@@ -1263,8 +1432,19 @@ AddSmmuV1V2Nodes (
}
}

- if ((NodeList->IdMappingCount > 0) &&
- (NodeList->IdMappingToken != CM_NULL_TOKEN)) {
+ if (NodeList->IdMappingCount > 0) {
+ if (NodeList->IdMappingToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Id Mapping token,"
+ " Token = 0x%x, Status =%r\n",
+ NodeList->IdMappingToken,
+ Status
+ ));
+ return Status;
+ }
+
// Ids for SMMU v1/v2 Node
IdMapArray = (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE*)((UINT8*)SmmuNode +
SmmuNode->Node.IdReference);
@@ -1300,6 +1480,7 @@ AddSmmuV1V2Nodes (
@param [in] This Pointer to the table Generator.
@param [in] CfgMgrProtocol Pointer to the Configuration Manager
Protocol Interface.
+ @param [in] AcpiTableInfo Pointer to the ACPI table info structure.
@param [in] Iort Pointer to IORT table structure.
@param [in] NodesStartOffset Offset for the start of the SMMUv3 Nodes.
@param [in] NodeList Pointer to an array of SMMUv3 Node Objects.
@@ -1314,6 +1495,7 @@ EFI_STATUS
AddSmmuV3Nodes (
IN CONST ACPI_TABLE_GENERATOR * CONST This,
IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
IN CONST EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort,
IN CONST UINT32 NodesStartOffset,
IN CONST CM_ARM_SMMUV3_NODE * NodeList,
@@ -1346,12 +1528,18 @@ AddSmmuV3Nodes (
// Populate the node header
SmmuV3Node->Node.Type = EFI_ACPI_IORT_TYPE_SMMUv3;
SmmuV3Node->Node.Length = (UINT16)NodeLength;
- SmmuV3Node->Node.Revision = 2;
- SmmuV3Node->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
SmmuV3Node->Node.NumIdMappings = NodeList->IdMappingCount;
SmmuV3Node->Node.IdReference = (NodeList->IdMappingCount == 0) ?
0 : sizeof (EFI_ACPI_6_0_IO_REMAPPING_SMMU3_NODE);

+ if (AcpiTableInfo->AcpiTableRevision < EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ SmmuV3Node->Node.Revision = 2;
+ SmmuV3Node->Node.Identifier = EFI_ACPI_RESERVED_DWORD;
+ } else {
+ SmmuV3Node->Node.Revision = 4;
+ SmmuV3Node->Node.Identifier = NodeList->Identifier;
+ }
+
// SMMUv3 specific data
SmmuV3Node->Base = NodeList->BaseAddress;
SmmuV3Node->Flags = NodeList->Flags;
@@ -1379,8 +1567,19 @@ AddSmmuV3Nodes (
SmmuV3Node->DeviceIdMappingIndex = NodeList->DeviceIdMappingIndex;
}

- if ((NodeList->IdMappingCount > 0) &&
- (NodeList->IdMappingToken != CM_NULL_TOKEN)) {
+ if (NodeList->IdMappingCount > 0) {
+ if (NodeList->IdMappingToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Id Mapping token,"
+ " Token = 0x%x, Status =%r\n",
+ NodeList->IdMappingToken,
+ Status
+ ));
+ return Status;
+ }
+
// Ids for SMMUv3 node
IdMapArray = (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE*)((UINT8*)SmmuV3Node +
SmmuV3Node->Node.IdReference);
@@ -1417,6 +1616,7 @@ AddSmmuV3Nodes (
@param [in] This Pointer to the table Generator.
@param [in] CfgMgrProtocol Pointer to the Configuration Manager
Protocol Interface.
+ @param [in] AcpiTableInfo Pointer to the ACPI table info structure.
@param [in] Iort Pointer to IORT table structure.
@param [in] NodesStartOffset Offset for the start of the PMCG Nodes.
@param [in] NodeList Pointer to an array of PMCG Node Objects.
@@ -1431,6 +1631,7 @@ EFI_STATUS
AddPmcgNodes (
IN CONST ACPI_TABLE_GENERATOR * CONST This,
IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
IN CONST EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort,
IN CONST UINT32 NodesStartOffset,
IN CONST CM_ARM_PMCG_NODE * NodeList,
@@ -1465,12 +1666,18 @@ AddPmcgNodes (
// Populate the node header
PmcgNode->Node.Type = EFI_ACPI_IORT_TYPE_PMCG;
PmcgNode->Node.Length = (UINT16)NodeLength;
- PmcgNode->Node.Revision = 1;
- PmcgNode->Node.Reserved = EFI_ACPI_RESERVED_DWORD;
PmcgNode->Node.NumIdMappings = NodeList->IdMappingCount;
PmcgNode->Node.IdReference = (NodeList->IdMappingCount == 0) ?
0 : sizeof (EFI_ACPI_6_0_IO_REMAPPING_PMCG_NODE);

+ if (AcpiTableInfo->AcpiTableRevision < EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ PmcgNode->Node.Revision = 1;
+ PmcgNode->Node.Identifier = EFI_ACPI_RESERVED_DWORD;
+ } else {
+ PmcgNode->Node.Revision = 2;
+ PmcgNode->Node.Identifier = NodeList->Identifier;
+ }
+
// PMCG specific data
PmcgNode->Base = NodeList->BaseAddress;
PmcgNode->OverflowInterruptGsiv = NodeList->OverflowInterrupt;
@@ -1494,8 +1701,19 @@ AddPmcgNodes (
return Status;
}

- if ((NodeList->IdMappingCount > 0) &&
- (NodeList->IdMappingToken != CM_NULL_TOKEN)) {
+ if (NodeList->IdMappingCount > 0) {
+ if (NodeList->IdMappingToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Id Mapping token,"
+ " Token = 0x%x, Status =%r\n",
+ NodeList->IdMappingToken,
+ Status
+ ));
+ return Status;
+ }
+
// Ids for PMCG node
IdMapArray = (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE*)((UINT8*)PmcgNode +
PmcgNode->Node.IdReference);
@@ -1526,6 +1744,273 @@ AddPmcgNodes (
return EFI_SUCCESS;
}

+/** Update the Memory Range Descriptor Array.
+
+ This function retrieves the Memory Range Descriptor objects referenced by
+ MemRangeDescToken and updates the Memory Range Descriptor array.
+
+ @param [in] This Pointer to the table Generator.
+ @param [in] CfgMgrProtocol Pointer to the Configuration Manager
+ Protocol Interface.
+ @param [in] DescArray Pointer to an array of Memory Range
+ Descriptors.
+ @param [in] DescCount Number of Id Descriptors.
+ @param [in] DescToken Reference Token for retrieving the
+ Memory Range Descriptor Array.
+
+ @retval EFI_SUCCESS Table generated successfully.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_NOT_FOUND The required object was not found.
+**/
+STATIC
+EFI_STATUS
+AddMemRangeDescArray (
+ IN CONST ACPI_TABLE_GENERATOR * CONST This,
+ IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC * DescArray,
+ IN UINT32 DescCount,
+ IN CONST CM_OBJECT_TOKEN DescToken
+ )
+{
+ EFI_STATUS Status;
+ CM_ARM_MEMORY_RANGE_DESCRIPTOR * MemRangeDesc;
+ UINT32 MemRangeDescCount;
+
+ ASSERT (DescArray != NULL);
+
+ // Get the Id Mapping Array
+ Status = GetEArmObjMemoryRangeDescriptor (
+ CfgMgrProtocol,
+ DescToken,
+ &MemRangeDesc,
+ &MemRangeDescCount
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Failed to get Memory Range Descriptor array. Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ if (MemRangeDescCount < DescCount) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Failed to get the required number of Memory"
+ " Range Descriptors.\n"
+ ));
+ return EFI_NOT_FOUND;
+ }
+
+ // Populate the Memory Range Descriptor array
+ while (DescCount-- != 0) {
+
+ DescArray->Base = MemRangeDesc->BaseAddress;
+ DescArray->Length = MemRangeDesc->Length;
+ DescArray->Reserved = EFI_ACPI_RESERVED_DWORD;
+
+ DescArray++;
+ MemRangeDesc++;
+ }
+
+ return EFI_SUCCESS;
+}
+
+/** Update the RMR Node Information.
+
+ This function updates the RMR node information in the IORT table.
+
+ @param [in] This Pointer to the table Generator.
+ @param [in] CfgMgrProtocol Pointer to the Configuration Manager
+ Protocol Interface.
+ @param [in] AcpiTableInfo Pointer to the ACPI table info structure.
+ @param [in] Iort Pointer to IORT table structure.
+ @param [in] NodesStartOffset Offset for the start of the PMCG Nodes.
+ @param [in] NodeList Pointer to an array of PMCG Node Objects.
+ @param [in] NodeCount Number of PMCG Node Objects.
+
+ @retval EFI_SUCCESS Table generated successfully.
+ @retval EFI_INVALID_PARAMETER A parameter is invalid.
+ @retval EFI_NOT_FOUND The required object was not found.
+**/
+STATIC
+EFI_STATUS
+AddRmrNodes (
+ IN CONST ACPI_TABLE_GENERATOR * CONST This,
+ IN CONST EDKII_CONFIGURATION_MANAGER_PROTOCOL * CONST CfgMgrProtocol,
+ IN CONST CM_STD_OBJ_ACPI_TABLE_INFO * CONST AcpiTableInfo,
+ IN CONST EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort,
+ IN CONST UINT32 NodesStartOffset,
+ IN CONST CM_ARM_RMR_NODE * NodeList,
+ IN UINT32 NodeCount
+ )
+{
+ EFI_STATUS Status;
+ EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE * RmrNode;
+ EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE * IdMapArray;
+ EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC * MemRangeDescArray;
+ UINT64 NodeLength;
+
+ ASSERT (Iort != NULL);
+
+ RmrNode = (EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE*)((UINT8*)Iort +
+ NodesStartOffset);
+
+ while (NodeCount-- != 0) {
+ NodeLength = GetRmrNodeSize (NodeList);
+ if (NodeLength > MAX_UINT16) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: RMR Node length 0x%lx > MAX_UINT16. Status = %r\n",
+ NodeLength,
+ Status
+ ));
+ return Status;
+ }
+
+ if (NodeList->MemRangeDescCount == 0) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Memory Range Desc count = %d. Status = %r\n",
+ NodeList->MemRangeDescCount,
+ Status
+ ));
+ return Status;
+ }
+
+ if (NodeList->MemRangeDescToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Memory Range Descriptor token,"
+ " Token = 0x%x. Status = %r\n",
+ NodeList->MemRangeDescToken,
+ Status
+ ));
+ return Status;
+ }
+
+ // Populate the node header
+ RmrNode->Node.Type = EFI_ACPI_IORT_TYPE_RMR;
+ RmrNode->Node.Length = (UINT16)NodeLength;
+ RmrNode->Node.Revision = 1;
+ RmrNode->Node.Identifier = NodeList->Identifier;
+ RmrNode->Node.NumIdMappings = NodeList->IdMappingCount;
+ RmrNode->Node.IdReference = (NodeList->IdMappingCount == 0) ?
+ 0 : sizeof (EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE);
+
+ // RMR specific data
+ RmrNode->Flags = NodeList->Flags;
+ RmrNode->NumMemRangeDesc = NodeList->MemRangeDescCount;
+ RmrNode->MemRangeDescRef = (NodeList->MemRangeDescCount == 0) ?
+ 0 : (sizeof (EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE) +
+ (NodeList->IdMappingCount *
+ sizeof (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE)));
+
+ if (NodeList->IdMappingCount > 0) {
+ if (NodeList->IdMappingToken == CM_NULL_TOKEN) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Id Mapping token,"
+ " Token = 0x%x, Status =%r\n",
+ NodeList->IdMappingToken,
+ Status
+ ));
+ return Status;
+ }
+
+ // Ids for RMR node
+ IdMapArray = (EFI_ACPI_6_0_IO_REMAPPING_ID_TABLE*)((UINT8*)RmrNode +
+ RmrNode->Node.IdReference);
+
+ Status = AddIdMappingArray (
+ This,
+ CfgMgrProtocol,
+ IdMapArray,
+ NodeList->IdMappingCount,
+ NodeList->IdMappingToken
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Failed to add Id Mapping Array. Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+ }
+
+ // Memory Range Descriptors for RMR node
+ MemRangeDescArray = (EFI_ACPI_6_0_IO_REMAPPING_MEM_RANGE_DESC*)(
+ (UINT8*)RmrNode +
+ RmrNode->MemRangeDescRef
+ );
+
+ Status = AddMemRangeDescArray (
+ This,
+ CfgMgrProtocol,
+ MemRangeDescArray,
+ NodeList->MemRangeDescCount,
+ NodeList->MemRangeDescToken
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Failed to Memory Range Descriptor Array. Status = %r\n",
+ Status
+ ));
+ return Status;
+ }
+
+ // Next RMR Node
+ RmrNode = (EFI_ACPI_6_0_IO_REMAPPING_RMR_NODE*)((UINT8*)RmrNode +
+ RmrNode->Node.Length);
+ NodeList++;
+ } // RMR Node
+
+ return EFI_SUCCESS;
+}
+
+/** Validates that the IORT nodes Identifier are unique.
+
+ @param [in] NodeIndexer Pointer to the Node Indexer.
+ @param [in] NodeCount Number of IORT Nodes.
+
+ @retval EFI_SUCCESS Success.
+ @retval EFI_INVALID_PARAMETER Identifier field not unique.
+**/
+STATIC
+EFI_STATUS
+ValidateNodeIdentifiers (
+ IN CONST IORT_NODE_INDEXER * CONST NodeIndexer,
+ IN UINT32 NodeCount
+ )
+{
+ UINT32 IndexI;
+ UINT32 IndexJ;
+
+ for (IndexI = 0; IndexI < NodeCount; IndexI++) {
+ for (IndexJ = 0; IndexJ < NodeCount; IndexJ++) {
+ if ((IndexI != IndexJ) &&
+ (NodeIndexer[IndexI].Identifier == NodeIndexer[IndexJ].Identifier)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: UID %d of Token %p matches with that of Token %p.\n",
+ NodeIndexer[IndexI].Identifier,
+ NodeIndexer[IndexI].Token,
+ NodeIndexer[IndexJ].Token
+ ));
+ return EFI_INVALID_PARAMETER;
+ }
+ }// IndexJ
+ } // IndexI
+ return EFI_SUCCESS;
+}
+
/** Construct the IORT ACPI table.

This function invokes the Configuration Manager protocol interface
@@ -1570,6 +2055,7 @@ BuildIortTable (
UINT32 SmmuV1V2NodeCount;
UINT32 SmmuV3NodeCount;
UINT32 PmcgNodeCount;
+ UINT32 RmrNodeCount;

UINT32 ItsGroupOffset;
UINT32 NamedComponentOffset;
@@ -1577,6 +2063,7 @@ BuildIortTable (
UINT32 SmmuV1V2Offset;
UINT32 SmmuV3Offset;
UINT32 PmcgOffset;
+ UINT32 RmrOffset;

CM_ARM_ITS_GROUP_NODE * ItsGroupNodeList;
CM_ARM_NAMED_COMPONENT_NODE * NamedComponentNodeList;
@@ -1584,6 +2071,7 @@ BuildIortTable (
CM_ARM_SMMUV1_SMMUV2_NODE * SmmuV1V2NodeList;
CM_ARM_SMMUV3_NODE * SmmuV3NodeList;
CM_ARM_PMCG_NODE * PmcgNodeList;
+ CM_ARM_RMR_NODE * RmrNodeList;

EFI_ACPI_6_0_IO_REMAPPING_TABLE * Iort;
IORT_NODE_INDEXER * NodeIndexer;
@@ -1726,6 +2214,27 @@ BuildIortTable (
// Add the PMCG node count
IortNodeCount += PmcgNodeCount;

+ if (AcpiTableInfo->AcpiTableRevision >= EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ // Get the RMR node info
+ Status = GetEArmObjRmr (
+ CfgMgrProtocol,
+ CM_NULL_TOKEN,
+ &RmrNodeList,
+ &RmrNodeCount
+ );
+ if (EFI_ERROR (Status) && (Status != EFI_NOT_FOUND)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Failed to get RMR Node Info. Status = %r\n",
+ Status
+ ));
+ goto error_handler;
+ }
+
+ // Add the RMR node count
+ IortNodeCount += RmrNodeCount;
+ }
+
// Allocate Node Indexer array
NodeIndexer = (IORT_NODE_INDEXER*)AllocateZeroPool (
(sizeof (IORT_NODE_INDEXER) *
@@ -1929,6 +2438,37 @@ BuildIortTable (
));
}

+ // RMR Nodes
+ if ((AcpiTableInfo->AcpiTableRevision >= EFI_ACPI_IO_REMAPPING_TABLE_REV3) &&
+ (RmrNodeCount > 0)) {
+ RmrOffset = (UINT32)TableSize;
+ // Size of RMR node list.
+ NodeSize = GetSizeofRmrNodes (
+ RmrOffset,
+ RmrNodeList,
+ RmrNodeCount,
+ &NodeIndexer
+ );
+ if (NodeSize > MAX_UINT32) {
+ Status = EFI_INVALID_PARAMETER;
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Invalid Size of RMR Nodes. Status = %r\n",
+ Status
+ ));
+ goto error_handler;
+ }
+ TableSize += NodeSize;
+
+ DEBUG ((
+ DEBUG_INFO,
+ " RmrNodeCount = %d\n" \
+ " RmrOffset = %d\n",
+ RmrNodeCount,
+ RmrOffset
+ ));
+ }
+
DEBUG ((
DEBUG_INFO,
"INFO: IORT:\n" \
@@ -1950,6 +2490,19 @@ BuildIortTable (
goto error_handler;
}

+ // Validate that the identifiers for the nodes are unique
+ if (AcpiTableInfo->AcpiTableRevision >= EFI_ACPI_IO_REMAPPING_TABLE_REV3) {
+ Status = ValidateNodeIdentifiers (Generator->NodeIndexer, IortNodeCount);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Node Identifier not unique. Status = %r\n",
+ Status
+ ));
+ goto error_handler;
+ }
+ }
+
// Allocate the Buffer for IORT table
*Table = (EFI_ACPI_DESCRIPTION_HEADER*)AllocateZeroPool (TableSize);
if (*Table == NULL) {
@@ -1998,6 +2551,7 @@ BuildIortTable (
Status = AddItsGroupNodes (
This,
CfgMgrProtocol,
+ AcpiTableInfo,
Iort,
ItsGroupOffset,
ItsGroupNodeList,
@@ -2017,6 +2571,7 @@ BuildIortTable (
Status = AddNamedComponentNodes (
This,
CfgMgrProtocol,
+ AcpiTableInfo,
Iort,
NamedComponentOffset,
NamedComponentNodeList,
@@ -2036,6 +2591,7 @@ BuildIortTable (
Status = AddRootComplexNodes (
This,
CfgMgrProtocol,
+ AcpiTableInfo,
Iort,
RootComplexOffset,
RootComplexNodeList,
@@ -2055,6 +2611,7 @@ BuildIortTable (
Status = AddSmmuV1V2Nodes (
This,
CfgMgrProtocol,
+ AcpiTableInfo,
Iort,
SmmuV1V2Offset,
SmmuV1V2NodeList,
@@ -2074,6 +2631,7 @@ BuildIortTable (
Status = AddSmmuV3Nodes (
This,
CfgMgrProtocol,
+ AcpiTableInfo,
Iort,
SmmuV3Offset,
SmmuV3NodeList,
@@ -2093,6 +2651,7 @@ BuildIortTable (
Status = AddPmcgNodes (
This,
CfgMgrProtocol,
+ AcpiTableInfo,
Iort,
PmcgOffset,
PmcgNodeList,
@@ -2101,7 +2660,27 @@ BuildIortTable (
if (EFI_ERROR (Status)) {
DEBUG ((
DEBUG_ERROR,
- "ERROR: IORT: Failed to add SMMUv3 Node. Status = %r\n",
+ "ERROR: IORT: Failed to add PMCG Node. Status = %r\n",
+ Status
+ ));
+ goto error_handler;
+ }
+ }
+
+ if (RmrNodeCount > 0) {
+ Status = AddRmrNodes (
+ This,
+ CfgMgrProtocol,
+ AcpiTableInfo,
+ Iort,
+ RmrOffset,
+ RmrNodeList,
+ RmrNodeCount
+ );
+ if (EFI_ERROR (Status)) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "ERROR: IORT: Failed to add RMR Node. Status = %r\n",
Status
));
goto error_handler;
@@ -2184,11 +2763,11 @@ ACPI_IORT_GENERATOR IortGenerator = {
// Generator Description
L"ACPI.STD.IORT.GENERATOR",
// ACPI Table Signature
- EFI_ACPI_6_2_IO_REMAPPING_TABLE_SIGNATURE,
+ EFI_ACPI_6_3_IO_REMAPPING_TABLE_SIGNATURE,
// ACPI Table Revision supported by this Generator
- EFI_ACPI_IO_REMAPPING_TABLE_REVISION,
+ EFI_ACPI_IO_REMAPPING_TABLE_REV3,
// Minimum supported ACPI Table Revision
- EFI_ACPI_IO_REMAPPING_TABLE_REVISION,
+ EFI_ACPI_IO_REMAPPING_TABLE_REV0,
// Creator ID
TABLE_GENERATOR_CREATOR_ID_ARM,
// Creator Revision
diff --git a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.h b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.h
index bbf8aaf9efa38a75626a49af6f380b1c8c1a0629..afe2089b1dc20ed671583e2a309cc1a46c3404c6 100644
--- a/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.h
+++ b/DynamicTablesPkg/Library/Acpi/Arm/AcpiIortLibArm/IortGenerator.h
@@ -1,6 +1,6 @@
/** @file

- Copyright (c) 2018, ARM Limited. All rights reserved.
+ Copyright (c) 2018 - 2021, ARM Limited. All rights reserved.

SPDX-License-Identifier: BSD-2-Clause-Patent

@@ -25,6 +25,9 @@ typedef struct IortNodeIndexer {
VOID * Object;
/// Node offset from the start of the IORT table
UINT32 Offset;
+
+ /// Unique identifier for the Node
+ UINT32 Identifier;
} IORT_NODE_INDEXER;

typedef struct AcpiIortGenerator {
--
'Guid(CE165669-3EF3-493F-B85D-6190EE5B9759)'