From: Pankaj Bansal <pankaj.bansal@...> LX2160A Reference Design Board (RDB) is a high-performance development platform that supports the QorIQ LX2160A Layerscape Architecture SOCs. Signed-off-by:

From: Pankaj Bansal <pankaj.bansal@...> LX2160A is QorIq Layerscape multicore communications processor with sixteen Arm Cortex-A72 cores. This SOC is based on Layerscape Chassis v3.2. Signed-off-b

From: Pankaj Bansal <pankaj.bansal@...> Chassis3V2 is the new chassis on which LS1028A and LX2160A SOCs are based. Add the Chassis3V2 package. Signed-off-by: Pankaj Bansal <pankaj.bansal@...>

From: Pankaj Bansal <pankaj.bansal@...> In NXP SOCs the UART clock is derived from System clock after PLL multiplication. Therefore, add the PL011UartClockLib implementation for NXP platforms. Sig

From: Pankaj Bansal <pankaj.bansal@...> Add ArmPlatformLib for LX2160ARDB platform that is based on ArmPlatformPkg/Library/ArmPlatformLibNull. Apart from the the interfaces exposed by ArmPlatformL

From: Pankaj Bansal <pankaj.bansal@...> edk2 recommends to use MDEPKG_NDEBUG for release builds and to use DISABLE_NEW_DEPRECATED_INTERFACES for all new platforms. Therefore, enable these flags fo

From: Pankaj Bansal <pankaj.bansal@...> Monotonic counter module from EmbeddedPkg doesn't treat the high 32 bit as non volatile, which is needed as per spec. Therefore, use Monotonic counter modul

From: Pankaj Bansal <pankaj.bansal@...> There are two implementations of Metronome protocol. EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf MdeModulePkg/Universal/Metronome/Metronome.inf Although nowhe

From: Pankaj Bansal <pankaj.bansal@...> LX2160A Reference Design Board (RDB) is a high-performance development platform that supports the QorIQ LX2160A Layerscape Architecture SOCs. This Platform

From: Pankaj Bansal <pankaj.bansal@...> Add VarStore Fd. This Fd is used to store non volatile variables in flash. Signed-off-by: Pankaj Bansal <pankaj.bansal@...> --- Platform/NXP/LX2160aRdbP

From: Pankaj Bansal <pankaj.bansal@...> LX2160A Reference Design Board (RDB) is a high-performance development platform that supports the QorIQ LX2160A Layerscape Architecture SOCs. Signed-off-by:

From: Pankaj Bansal <pankaj.bansal@...> LX2160A is QorIq Layerscape multicore communications processor with sixteen Arm Cortex-A72 cores. This SOC is based on Layerscape Chassis v3.2. Signed-off-b

From: Pankaj Bansal <pankaj.bansal@...> Chassis3V2 is the new chassis on which LS1028A and LX2160A SOCs are based. Add the Chassis3V2 package. Signed-off-by: Pankaj Bansal <pankaj.bansal@...>

From: Pankaj Bansal <pankaj.bansal@...> In NXP SOCs the UART clock is derived from System clock after PLL multiplication. Therefore, add the PL011UartClockLib implementation for NXP platforms. Sig

From: Pankaj Bansal <pankaj.bansal@...> edk2 recommends to use MDEPKG_NDEBUG for release builds and to use DISABLE_NEW_DEPRECATED_INTERFACES for all new platforms. Therefore, enable these flags fo

From: Pankaj Bansal <pankaj.bansal@...> Monotonic counter module from EmbeddedPkg doesn't treat the high 32 bit as non volatile, which is needed as per spec. Therefore, use Monotonic counter modul

From: Pankaj Bansal <pankaj.bansal@...> There are two implementations of Metronome protocol. EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf MdeModulePkg/Universal/Metronome/Metronome.inf Although nowhe

From: Pankaj Bansal <pankaj.bansal@...> LX2160A Reference Design Board (RDB) is a high-performance development platform that supports the QorIQ LX2160A Layerscape Architecture SOCs. This Platform

From: Pankaj Bansal <pankaj.bansal@...> RAM retrieval using SMC commands is common to all Layerscape SOCs. Therefore, move it to common MemoryInit Pei Lib. Signed-off-by: Pankaj Bansal <pankaj.ban

From: Pankaj Bansal <pankaj.bansal@...> This patch series adds PEI phase to NXP LS1043ARDB Platform. V4 series can be referred here: https://edk2.groups.io/g/devel/message/58367 I have taken care