From: Quan Nguyen <quan@...> This supports user to enable/disable RAS components running the system firmware such as HEST, BERT,... Cc: Chuong Tran

This supports: * Enable/Disable APEI Support * Enable/Disable CPPC Support * Enable/Disable LPI support * Enable/Disable Max Performance Mode Cc: Chuong Tran <chuong@...> Cc: Leif

From: Vu Nguyen <vunguyen@...> This screen only supports to configure the SubNUMA mode currently. Cc: Chuong Tran <chuong@...> Cc: Leif Lindholm

From: Vu Nguyen <vunguyen@...> Provide memory screen with below info: * Memory total capacity * Memory RAS and Performance Configuration * Per DIMM Information Cc: Chuong Tran

From: Vu Nguyen <vunguyen@...> Provide screen menu with basic platform information include: * Platform name * SCP firmware info * System bus clock frequency. Cc: Chuong Tran

From: Vu Nguyen <vunguyen@...> Helps to show various system information like CPU info and Board Setting values to UART console during boot process. Cc: Chuong Tran

From: Quan Nguyen <quan@...> This supports various SMBIOS tables type 0, 1, 2, 3, 4, 7, 8, 9, 11, 13, 16, 17, 19, 24 and 32. SMBIOS Type 1, 2 and 3 are hardcoded as Host-BMC

From: Vu Nguyen <vunguyen@...> This change is to produce RNG protocol which is required by several modules. Cc: Chuong Tran <chuong@...> Cc: Leif Lindholm

Add various ACPI tables for the Mt. Jade platform including: DSDT, SPCR, DBG2, GTDT, FACP, SSDT, MADT, PPTT, PCCT, SLIT, SRAT, and NFIT. Cc: Chuong Tran <chuong@...> Cc: Leif

This wires up the pre-built binary placed in the edk2-non-osi repository for PCIe VGA Controller support. Cc: Chuong Tran <chuong@...> Cc: Leif Lindholm <leif@...> Cc:

Just aware that the patch series hasn't been sent out by devel@edk2.groups.io. I will review other related patches once the patch series gets sent out by devel@edk2.groups.io. Best Regards, Sunny

From: Vu Nguyen <vunguyen@...> The roles of this driver: * Consume PcieCoreLib to initialize all enable PCIe controllers. * Produce neccessary protocols like RootBridgeIo an

From: Vu Nguyen <vunguyen@...> This change also enables the support for SCSI, NVMe, USB keyboard, and USB storage devices. Cc: Chuong Tran <chuong@...> Cc: Leif

From: Vu Nguyen <vunguyen@...> Provides basic features like: * Screen menu to change bifurcation setting of each Root Complex. Note that we can only change the option for Root

From: Vu Nguyen <vunguyen@...> Provides essential functions to initialize the PCIe Root Complex of Ampere Altra processor. Cc: Chuong Tran <chuong@...> Cc: Leif

The AcpiHelperLib provides functions to update the ACPI DSDT table after this table is installed. Cc: Chuong Tran <chuong@...> Cc: Leif Lindholm <leif@...> Cc: Michael D

The AcpiPccLib provides functions to allocate and get the physical address of PCC shared memory. Cc: Chuong Tran <chuong@...> Cc: Leif Lindholm <leif@...> Cc: Michael D

From: Vu Nguyen <vunguyen@...> The idea came from DeviceManagerUiLib that all related menu settings can be placed under a common entry. This change intends to provide a central

From: Vu Nguyen <vunguyen@...> Non-volatile variables now can be stored on flash. MM communication protocol is used to access storage on flash. Included in this change are: *

From: Quan Nguyen <quan@...> BootProgress will send 32-bit UEFI Status Code via doorbell to report its progress status. Currently support reporting Progress Status Code and Error