Reviewed-by: Michael D Kinney <michael.d.kinney@...>

Hi, If this is related to code first, are these patches for an edk2-staging branch. If so, that should be part of email subject. Also, the naming convention for the new values do not follow code

Rebecca, BasePrintLib is used for much more than just DEBUG() macros. This features should not modify the behavior of BasePrintLib. For example, a single module that links to BasePrintLib can use

Hi Chao, You can update the package YAML file to declare ECC exceptions. Here is an example of an existing exception that is similar to your use case.

It's a leftover from the work you did on the code, before I changed it to have the MMU and caches enabled on the APs. I'll go through and remove it and any others for the v2 patch which I'll send out

Implement a new debug feature to assist in recovering the SPI flash from broken firmware. This feature is intended to be used with the userspace tool presently in my repo

Why exactly do we need that call? I understand that some of the code needs to be clean to the PoC (on ARM) so that the AP can fetch instructions with the MMU and caches disabled. But the actual

Cc: Isaac Oram <isaac.w.oram@...> Cc: Nate DeSimone <nathaniel.l.desimone@...> Cc: Chasel Chiu <chasel.chiu@...> Signed-off-by: Benjamin Doron <benjamin.doron00@...> ---

Improvements based on ENE KB9012Q datasheet. Values read from EC ADC are much more consistent now. Some improvement still necessary before this is reliable, as my Rayleigh-SL (PCH-LP) is now

Add a HII form to Setup for controlling lockdown UPDs. Default to strict security, allowing it to be lifted for the user's convenience. This is not board-specific, and could be ported to other

Add a callback to notify the EC of platform resets. Cc: Isaac Oram <isaac.w.oram@...> Cc: Chasel Chiu <chasel.chiu@...> Cc: Nate DeSimone <nathaniel.l.desimone@...> Signed-off-by:

Perform EC read and write via SystemIO when EmbeddedControl is unavailable. Not properly tested yet. Re-sync against coreboot port. Does not yet handle SMM traps. In-progress. Cc: Isaac Oram

Update the AspireVn7Dash572G DSC files with assorted enhancements since the initial porting work. Some planned features, such as Secure Boot and measuring the default FSP UPDs to a TPM (which does

Remove unused includes, LibraryClasses and update a comment or two. Cc: Isaac Oram <isaac.w.oram@...> Cc: Chasel Chiu <chasel.chiu@...> Cc: Nate DeSimone

Cleanup some unnecessary library #include's and LibraryClasses copied from KabylakeRvp3 as part of the initial bring-up work. Some quality-of-life improvements, such as working Secure

HDMI port can be used with I2cHdmiDebugSerialPortLib, for debugging in all phases. Cc: Sai Chaganty <rangasai.v.chaganty@...> Cc: Isaac Oram <isaac.w.oram@...> Cc: Nate DeSimone

While the key patches here should probably be merged into the initial patches for this library, it appears it isn't being merged soon. Therefore, commit the patches that improve the library for S3

SecBoardInitLib is called to enable serial port before SerialPortInitialize and DEBUG(). This is strongly assumed to be necessary for I2cHdmiDebugSerialPortLib in SEC phase, which presently

Enable the HDMI debug port to be used for SEC phase debug. Commit my build configuration, which successfully ouputs debug messages in all phases and boot-flows: SEC, PEI, DXE and SMM, with handling

Signed-off-by: Sunil V L <sunilvl@...> --- Maintainers.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Maintainers.txt b/Maintainers.txt index a4a0e4b907..6fac3369dd