|
Casting i128 into f64 in UEFI Rust pagefaults
Hello everyone.While running Rust tests in UEFI environment, I have come across a numeric test that causes a pagefault. A simple reproducible example for this is given below:
```rust
fn main()
Hello everyone.While running Rust tests in UEFI environment, I have come across a numeric test that causes a pagefault. A simple reproducible example for this is given below:
```rust
fn main()
|
By
Ayush Singh
·
#91818
·
|
|
[PATCH v1 3/3] LogoFeaturePkg,BoardModulePkg: Set existing logo as BGRT
In MinPlatform, FSP-S displays the logo to the user early. However, this
means that no BGRT is written either. To reduce duplication in the flash
image, a new LogoDxe will set this BMP as the BGRT
In MinPlatform, FSP-S displays the logo to the user early. However, this
means that no BGRT is written either. To reduce duplication in the flash
image, a new LogoDxe will set this BMP as the BGRT
|
By
Benjamin Doron
·
#91817
·
|
|
[PATCH v1 2/3] UserAuthFeaturePkg: Included DXE versions are mutually exclusive
Versions of the DXE module perform nearly identical functions, and are
therefore mutually exclusive. Including both modules results in at least
a duplicate HII package and an "already started"
Versions of the DXE module perform nearly identical functions, and are
therefore mutually exclusive. Including both modules results in at least
a duplicate HII package and an "already started"
|
By
Benjamin Doron
·
#91816
·
|
|
[PATCH v1 1/3] AcpiDebugFeaturePkg: Included modules are mutually exclusive
The DXE and SMM versions of AcpiDebug perform the same task and
are therefore mutually exclusive. Including both modules results in a
duplicate ACPI table, resulting in the feature not working at
The DXE and SMM versions of AcpiDebug perform the same task and
are therefore mutually exclusive. Including both modules results in a
duplicate ACPI table, resulting in the feature not working at
|
By
Benjamin Doron
·
#91815
·
|
|
Re: [PATCH v2] BaseTools/VolInfo: Show encapsulation sections
Reviewed-by: Bob Feng <bob.c.feng@...>
Reviewed-by: Bob Feng <bob.c.feng@...>
|
By
Bob Feng
·
#91814
·
|
|
[PATCH] BaseTools/GenFds: Correct file type set for the PIC section
Corrently the set of file types for the PIC section contains two
duplicate values.
Replace the duplicate value with the correct one to fix the issue.
Signed-off-by: Konstantin Aladyshev
Corrently the set of file types for the PIC section contains two
duplicate values.
Replace the duplicate value with the correct one to fix the issue.
Signed-off-by: Konstantin Aladyshev
|
By
Konstantin Aladyshev
·
#91813
·
|
|
[PATCH v4] BaseTools/Capsule: Support signtool input subject name to sign capsule file
From: Jason1 Lin <jason1.lin@...>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3D3928
Windows-based system using signtool.exe to sign the capsule.
Add the support to using
From: Jason1 Lin <jason1.lin@...>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3D3928
Windows-based system using signtool.exe to sign the capsule.
Add the support to using
|
By
Lin, Jason1
·
#91812
·
|
|
Re: [PATCH] UefiPayloadPkg: Add macro to support selection of CryptoDxe driver
Reviewed-by: Guo Dong <guo.dong@...>
Reviewed-by: Guo Dong <guo.dong@...>
|
By
Guo Dong
·
#91811
·
|
|
[PATCH v4] BaseTools/Capsule: Support signtool input subject name to sign capsule file
From: Jason1 Lin <jason1.lin@...>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3D3928
Windows-based system using signtool.exe to sign the capsule.
Add the support to using
From: Jason1 Lin <jason1.lin@...>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3D3928
Windows-based system using signtool.exe to sign the capsule.
Add the support to using
|
By
Lin, Jason1
·
#91810
·
|
|
Re: [PATCH v3] BaseTools/Capsule: Add support for signtool to input subject name to sign capsule file
Created the PR for merge. https://github.com/tianocore/edk2/pull/3137
Created the PR for merge. https://github.com/tianocore/edk2/pull/3137
|
By
Bob Feng
·
#91809
·
|
|
Re: [PATCH 2/2] Platform/Sgi: Add serial debug controller to SSDT
Hi Sami/Thanu,
Please find my response inline -
Hi Sami/Thanu,
Please find my response inline -
|
By
Rohit Mathew
·
#91808
·
|
|
Re: [edk2-staging][PATCH v2 2/2] edk2-staging/EmulatorPkg: Introduce Hii2RedfishBiosDxe driver
[AMD Official Use Only - General]
Reviewed-by: Abner Chang <abner.chang@...>
[AMD Official Use Only - General]
Reviewed-by: Abner Chang <abner.chang@...>
|
By
Chang, Abner
·
#91807
·
|
|
Re: [edk2-staging][PATCH v2 1/2] edk2-staging/EmulatorPkg: Introduce Hii2RedfishBootDxe driver
[AMD Official Use Only - General]
Reviewed-by: Abner Chang <abner.chang@...>
[AMD Official Use Only - General]
Reviewed-by: Abner Chang <abner.chang@...>
|
By
Chang, Abner
·
#91806
·
|
|
Re: [PATCH 2/2] Platform/Sgi: Add serial debug controller to SSDT
Hi Rohit,
The decision to use the SBSA defined HID for the Generic UART was taken after extensive discussions within the Arm ecosystem. And as Sami points out, now that formal Linux driver support
Hi Rohit,
The decision to use the SBSA defined HID for the Generic UART was taken after extensive discussions within the Arm ecosystem. And as Sami points out, now that formal Linux driver support
|
By
Thanu Rangarajan <Thanu.Rangarajan@...>
·
#91805
·
|
|
Re: [PATCH 1/1] MdeModulePkg: Enhance bus scan for all root bridge instances
Hi Mike,
Yes. With this chance, each root bridge will have the bus resource size except the one which
Meet the bus shortage case. Then the Bus Rebalance handle of EfiPciHostBridgeEndBusAllocation on
Hi Mike,
Yes. With this chance, each root bridge will have the bus resource size except the one which
Meet the bus shortage case. Then the Bus Rebalance handle of EfiPciHostBridgeEndBusAllocation on
|
By
Nong, Foster <foster.nong@...>
·
#91804
·
|
|
Re: [PATCH 1/1] ArmPlatformPkg/PrePeiCore: Print the firmware version early in boot
Hi Rebecca,
Please find my response inline marked [SAMI].
Regards,
Sami Mujawar
On 21/07/2022 05:23 pm, Sami Mujawar via groups.io wrote:
[/SAMI] I had a look at the SerialPortInitialize()
Hi Rebecca,
Please find my response inline marked [SAMI].
Regards,
Sami Mujawar
On 21/07/2022 05:23 pm, Sami Mujawar via groups.io wrote:
[/SAMI] I had a look at the SerialPortInitialize()
|
By
Sami Mujawar
·
#91803
·
|
|
Re: [edk2][PATCH V4 1/1] ArmPlatformPkg/PrePeiCore: Invoke constructors for SEC phase
Hi Rohit,
This patch looks good to me.
Reviewed-by: Sami Mujawar <sami.mujawar@...>
Regards,
Sami Mujawar
Hi Rohit,
This patch looks good to me.
Reviewed-by: Sami Mujawar <sami.mujawar@...>
Regards,
Sami Mujawar
|
By
Sami Mujawar
·
#91802
·
|
|
Re: [PATCH 2/2] Platform/Sgi: Add serial debug controller to SSDT
Hi Rohit,
Please find my response inline marked [SAMI].
Regards,
Sami Mujawar
On 22/07/2022 01:46 pm, Rohit Mathew wrote:
[SAMI] Following is an extract from
Hi Rohit,
Please find my response inline marked [SAMI].
Regards,
Sami Mujawar
On 22/07/2022 01:46 pm, Rohit Mathew wrote:
[SAMI] Following is an extract from
|
By
Sami Mujawar
·
#91801
·
|
|
回复: [PATCH v4 00/21] Add Raw algorithm support using Arm FW-TRNG interface
Pierre:
The change in MdePkg is good to me. Reviewed-by: Liming Gao
<gaoliming@...>
Thanks
Liming
Pierre:
The change in MdePkg is good to me. Reviewed-by: Liming Gao
<gaoliming@...>
Thanks
Liming
|
By
gaoliming
·
#91800
·
|
|
回复: 回复: [edk2-devel] [PATCHv3 1/1] MdePkg/UefiDevicePathLib: Add support for PEIMs
This change has been merged in edk2 master.
This change has been merged in edk2 master.
|
By
gaoliming
·
#91799
·
|