devel@edk2.groups.io

Re: [edk2-platforms PATCH v1 0/1] BoardModulePkg: Copy device path

[Public] Hi, Please review the patch. Thanks AbduL

By Attar, AbdulLateef (Abdul Lateef) <AbdulLateef.Attar@...> · #89270 ·

[PATCH v2] MdeModulePkg/XhciDxe: Add access xHCI Extended Capabilities Pointer

From: Ian Chiu <Ian.chiu@...> Add support process Port Speed field value of PORTSC according to Supported= Protocol Capability (new design in xHCI spec 1.2

By Chiu, Ian · #89269 ·

Re: [PATCH] BaseTools: Fix dependency issue in PcdValueInit

Hello maintainers, Any interest in accepting this and the "BaseTools/Conf: Fix Dynamic-Library-File template" patch? Thanks, Jake

By Jake Garver · #89268 ·

Re: [PATCH v4] OvmfPkg/BhyveBhfPkg: add support for QemuFwCfg

Hi, does it require more review to get merged? Best regards Corvin Beckhoff Automation GmbH & Co. KG | Managing Director: Dipl. Phys. Hans Beckhoff Registered office: Verl, Germany | Register

By Corvin Köhne <c.koehne@...> · #89267 ·

Re: [PATCH v6 2/6] OvmfPkg/FdtPciHostBridgeLib: io range is not mandatory

Thanks. Reviewed-by: Abner Chang <abner.chang@...>

By Abner Chang · #89266 ·

Re: [PATCH v3 0/6] OvmfPkg/VirtioGpuDxe: use host display resolution

No, I'll pick these up today.

By Ard Biesheuvel · #89265 ·

Re: [PATCH v6 0/6] OvmfPkg/Microvm/pcie: add pcie support

Thanks Gerd. I'm happy to take these, but not without an ack from the MdeModulePkg maintainers.

By Ard Biesheuvel · #89264 ·

Re: [PATCH v3 0/6] OvmfPkg/VirtioGpuDxe: use host display resolution

Ping. Anything blocking the merge id this series? thanks, Gerd

By Gerd Hoffmann · #89263 ·

[PATCH v6 2/6] OvmfPkg/FdtPciHostBridgeLib: io range is not mandatory

io range is not mandatory according to pcie spec, so allow host bridges without io address space. Signed-off-by: Gerd Hoffmann <kraxel@...> --- .../FdtPciHostBridgeLib/FdtPciHostBridgeLib.c |

By Gerd Hoffmann · #89262 ·

[PATCH v6 6/6] OvmfPkg/Microvm/pcie: add pcie support

Link in pcie and host bridge bits. Enables support for PCIe in microvm (qemu-system-x86_64 -M microvm,pcie=on). Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3777 Signed-off-by: Gerd Hoffmann

By Gerd Hoffmann · #89261 ·

[PATCH v6 5/6] OvmfPkg/Microvm/pcie: mPhysMemAddressWidth tweak

microvm places the 64bit mmio space at the end of the physical address space. So mPhysMemAddressWidth must be correct, otherwise the pci host bridge setup throws an error because it thinks the 64bit

By Gerd Hoffmann · #89260 ·

[PATCH v6 4/6] OvmfPkg/Microvm/pcie: no vbeshim please

Those old windows versions which need the vbeshim hack will not run on microvm anyway. Signed-off-by: Gerd Hoffmann <kraxel@...> --- OvmfPkg/QemuVideoDxe/VbeShim.c | 2 ++ 1 file changed, 2

By Gerd Hoffmann · #89259 ·

[PATCH v6 3/6] OvmfPkg/Platform: unfix PcdPciExpressBaseAddress

Will be set by FdtPciHostBridgeLib, so it can't be an fixed when we want use that library. Signed-off-by: Gerd Hoffmann <kraxel@...> --- OvmfPkg/Library/PlatformInitLib/PlatformInitLib.inf |

By Gerd Hoffmann · #89258 ·

[PATCH v6 0/6] OvmfPkg/Microvm/pcie: add pcie support

Needs two little tweaks in PCI code because microvm supports mmio only. Other than that just wire up the existing code (the PCIe host adapter used by microvm is the same (virtual) hardware used by the

By Gerd Hoffmann · #89257 ·

[PATCH v6 1/6] MdeModulePkg/PciHostBridge: io range is not mandatory

io range is not mandatory according to pcie spec, so allow bridge configurations without io address space assigned. Signed-off-by: Gerd Hoffmann <kraxel@...> Reviewed-by: Ard Biesheuvel

By Gerd Hoffmann · #89256 ·

[PATCH v2 1/1] MdePkg: add SmmCpuRendezvousLib.h and SmmCpuRendezvousLibNull implement.

REF： https://bugzilla.tianocore.org/show_bug.cgi?id=3912 UefiCpuPkg define a new Protocol with the new services SmmWaitForAllProcessor(), which can be used by SMI handler to optionally wait for

By Li, Zhihao · #89255 ·

Re: [PATCH 1/1] OvmfPkg: Add README for TDVF

Not working (yet) with upstream qemu. This needs a clarification which qemu repository you are talking about (and once tdx patches landed upstream this should be replaced with the minimum qemu

By Gerd Hoffmann · #89254 ·

Re: [PATCH] Bug 3898 - S3 Resume result in executing garbage address

Reviewed-by: Ray Ni <ray.ni@...> + @Wang, Jian J

By Ni, Ray · #89253 ·

[PATCH] Bug 3898 - S3 Resume result in executing garbage address

In Release Build, Trying to execute ppi Function even after Locate ppi failed. Signed-off-by: cbduggap <chinni.b.duggapu@...> --- MdeModulePkg/Core/DxeIplPeim/DxeLoad.c | 1 + 1 file changed,

By cbduggap · #89252 ·

Re: [edk2-platforms][PATCH v1 0/3] MinPlatformPkg: Add FADT duty offset and width PCDs

Thanks Michael! For this patch series: Reviewed-by: Chasel Chiu <chasel.chiu@...>

By Chiu, Chasel · #89251 ·

Messages