From: Vu Nguyen <vunguyen@...> This screen is to add configuration regarding CPU. Currently, this screen just adds a option for SubNUMA mode selection. Cc: Chuong Tran

From: Vu Nguyen <vunguyen@...> Provide screen menu with basic platform information include: * Platform name * SCP firmware info * System bus clock frequency. Cc: Chuong Tran

From: Vu Nguyen <vunguyen@...> Helps to show various system information like CPU info and Board Setting values to UART console during boot process. Cc: Chuong Tran

From: Quan Nguyen <quan@...> This supports various SMBIOS tables type 0, 1, 2, 3, 4, 7, 8, 9, 11, 13, 16, 17, 19, 24 and 32. SMBIOS Type 1, 2 and 3 are hardcoded as Host-BMC

From: Vu Nguyen <vunguyen@...> This change is to produce RNG protocol which is required by several modules. Cc: Chuong Tran <chuong@...> Cc: Leif Lindholm

From: Vu Nguyen <vunguyen@...> Registers the Platform NotifyPhase() to prevent unexpected issues caused by the enabled PCIe controllers which have unstable link. Cc: Chuong Tran

From: Vu Nguyen <vunguyen@...> Provides wrapper calls to the Ac01PcieLib to handle the PCIe access. As Ampere Altra processor supports upto 16 PCIe Root Complexs, the target Root

This wires up the pre-built binary placed in the edk2-non-osi repository for PCIe VGA Controller support. Cc: Chuong Tran <chuong@...> Cc: Leif Lindholm <leif@...> Cc:

From: Vu Nguyen <vunguyen@...> This change also enables the support for SCSI, NVMe, USB keyboard, and USB storage devices. Cc: Chuong Tran <chuong@...> Cc: Leif

Add various ACPI tables for the Mt. Jade platform including: DSDT, SPCR, DBG2, GTDT, FACP, SSDT, MADT, PPTT, PCCT, SLIT, SRAT, and NFIT. Cc: Chuong Tran <chuong@...> Cc: Leif

From: Vu Nguyen <vunguyen@...> Provides the number of supported RootBridges and the resource allocated for each RootBridge. These information are essential to the HostBridge driver

From: Vu Nguyen <vunguyen@...> Provides basic features like: * Screen menu to change the bifurcation setting of each Root Complex. Note that we can only make change for the Root

From: Vu Nguyen <vunguyen@...> Provides essential functions to initialize the PCIe Root Complex of Ampere Altra processor. Cc: Chuong Tran <chuong@...> Cc: Leif

From: Vu Nguyen <vunguyen@...> The idea came from DeviceManagerUiLib that all related menu settings can be placed under a common entry. This change intends to provide a

From: Vu Nguyen <vunguyen@...> This supports storing the UEFI non-volatile varibles on flash through the MM communication interface instead of emulating. Below are modules added

From: Quan Nguyen <quan@...> BootProgress will send 32-bit UEFI Status Code via doorbell to report its progress status. Currently support reporting Progress Status Code and Error

From: Vu Nguyen <vunguyen@...> This library adds the support for retrieving and updating system datetime over real RTC PCF85063 device on Mt. Jade platform instead of using virtual

From: Vu Nguyen <vunguyen@...> The DwGpioLib library provides basic functions to control the GPIO controller on Ampere Altra processor. Cc: Chuong Tran

From: Vu Nguyen <vunguyen@...> The DwI2cLib library provides basic functions to control the I2C controller on Ampere Altra processor. Cc: Chuong Tran

The FailSafeDxe is a driver for the FailSafe feature which reverts the system's configuration to known good values if the system fails to boot up multiple times. Also, this driver implements the