Re: [edk2-platforms][PATCH 0/2] Platform/Sgi: Update serial port usage


Sami Mujawar
 

Apologies for the delay.

Merged as f4679715a40d..8d8bb28d2c4b

Regards,

Sami Mujawar

On 04/07/2022 05:59 pm, Rohit Mathew wrote:
Patch 433b5b1b0f7f ("Platform/Sgi: Route logs to different sets of
consoles") setup the routing of console messages to a different set
of UART ports. Following up with this change, this patch series updates
the ACPI tables to route the console messages to the console UART and
adds a device entry for the debug UART.

Link to github branch for the patches in this series -
https://github.com/rohit-arm/edk2-platforms/tree/serial_port_acpi

Rohit Mathew (2):
Platform/Sgi: Update ACPI tables to use console UART
Platform/Sgi: Add serial debug controller to SSDT

.../SgiPkg/AcpiTables/RdE1EdgeAcpiTables.inf | 3 +++
.../SgiPkg/AcpiTables/RdN1EdgeAcpiTables.inf | 3 +++
.../SgiPkg/AcpiTables/RdN1EdgeX2AcpiTables.inf | 3 +++
.../ARM/SgiPkg/AcpiTables/RdN2AcpiTables.inf | 3 +++
.../SgiPkg/AcpiTables/RdN2Cfg1AcpiTables.inf | 3 +++
.../ARM/SgiPkg/AcpiTables/RdV1AcpiTables.inf | 3 +++
.../ARM/SgiPkg/AcpiTables/RdV1McAcpiTables.inf | 3 +++
.../ARM/SgiPkg/AcpiTables/Sgi575AcpiTables.inf | 3 +++
Platform/ARM/SgiPkg/AcpiTables/Spcr.aslc | 2 +-
Platform/ARM/SgiPkg/AcpiTables/SsdtRos.asl | 17 ++++++++++++++++-
10 files changed, 41 insertions(+), 2 deletions(-)

Join devel@edk2.groups.io to automatically receive all group messages.