[PATCH] PcAtChipsetPkg: Change the flow of PcRtcInit()


Zhuoran Chao
 

REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3913

The original flow of PcRtcInit() is like:
1. Guarantee atomic accesses to the RTC time registers and
read out the value.
2. Program RTC register B. (adopt 12h mode or 24h mode. Current
bios code sets RTC to 24h mode by default).
3. Then function ConvertRtcTimeToEfiTime converts the RTC time
value to their 24h mode by checking the hour format bit
(1:24h mode,0:12h mode).
And here lies the problem: Step3 will fail to adjust the value
if Step2 already sets RTC to 24h mode. The hour value in 12h mode
will not be converted to its 24h mode.

The solution is to program RTC register B a little later when all
the original RTC registers' value is retrieved, adjusted
and validated.

Cc: Ray Ni <ray.ni@...>

Signed-off-by: Zhuoran Chao <zhuoran.chao@...>
---
PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
index 0fbfa4bcee..ea56a66267 100644
--- a/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
+++ b/PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcRtc.c
@@ -269,13 +269,6 @@ PcRtcInit (
Time.Month = RtcRead (RTC_ADDRESS_MONTH);
Time.Year = RtcRead (RTC_ADDRESS_YEAR);

- //
- // Set RTC configuration after get original time
- // The value of bit AIE should be reserved.
- //
- RegisterB.Data = FixedPcdGet8 (PcdInitialValueRtcRegisterB) | (RegisterB.Data & BIT5);
- RtcWrite (RTC_ADDRESS_REGISTER_B, RegisterB.Data);
-
//
// Release RTC Lock.
//
@@ -330,6 +323,13 @@ PcRtcInit (
Time.Daylight = 0;
}

+ //
+ // Set RTC configuration after get original time
+ // The value of bit AIE should be reserved.
+ //
+ RegisterB.Data = FixedPcdGet8 (PcdInitialValueRtcRegisterB) | (RegisterB.Data & BIT5);
+ RtcWrite (RTC_ADDRESS_REGISTER_B, RegisterB.Data);
+
//
// Reset time value according to new RTC configuration
//
--
2.31.1.windows.1

Join devel@edk2.groups.io to automatically receive all group messages.