[PATCH v4 3/7] MdePkg: MmCommunication: Introduce EFI_MM_COMMUNICATION3_PROTOCOL to MdePkg


Kun Qin
 

REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3398
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3430

This change introduces a new definition for MM communicate protocol v3.

This protocol will be installed under a new GUID in contrast to exisiting
EFI_MM_COMMUNICATION_PROTOCOL.

Data communicated to MM through EFI_MM_COMMUNICATION3_PROTOCOL should
always start with EFI_MM_COMMUNICATE_HEADER_V3 with its HeaderGuid,
Signature and Version fields properly populated.

Cc: Michael D Kinney <michael.d.kinney@...>
Cc: Liming Gao <gaoliming@...>
Cc: Zhiguang Liu <zhiguang.liu@...>
Cc: Hao A Wu <hao.a.wu@...>
Cc: Marvin Häuser <mhaeuser@...>
Cc: Bret Barkelew <Bret.Barkelew@...>
Cc: Michael Kubacki <michael.kubacki@...>

Signed-off-by: Kun Qin <kuqin12@...>
---

Notes:
v3:
- Newly introduced v3 of communicate protocol

v4:
- Rebased with uncrustify changes.

MdePkg/Include/Protocol/MmCommunication3.h | 70 ++++++++++++++++++++
MdePkg/MdePkg.dec | 3 +
2 files changed, 73 insertions(+)

diff --git a/MdePkg/Include/Protocol/MmCommunication3.h b/MdePkg/Include/Protocol/MmCommunication3.h
new file mode 100644
index 000000000000..0df9e5b875b7
--- /dev/null
+++ b/MdePkg/Include/Protocol/MmCommunication3.h
@@ -0,0 +1,70 @@
+/** @file
+ EFI MM Communication Protocol 2 as defined in the PI 1.7 errata A specification.
+
+ This protocol provides a means of communicating between drivers outside of MM and MMI
+ handlers inside of MM.
+
+ Copyright (c) 2017, Intel Corporation. All rights reserved.<BR>
+ Copyright (c) 2019, Arm Limited. All rights reserved.<BR>
+ SPDX-License-Identifier: BSD-2-Clause-Patent
+
+**/
+
+#ifndef MM_COMMUNICATION3_H_
+#define MM_COMMUNICATION3_H_
+
+#include <Pi/PiMultiPhase.h>
+
+#define EFI_MM_COMMUNICATION3_PROTOCOL_GUID \
+ { \
+ 0xf7234a14, 0xdf2, 0x46c0, { 0xad, 0x28, 0x90, 0xe6, 0xb8, 0x83, 0xa7, 0x2f } \
+ }
+
+typedef struct _EFI_MM_COMMUNICATION3_PROTOCOL EFI_MM_COMMUNICATION3_PROTOCOL;
+
+/**
+ Communicates with a registered handler.
+
+ This function provides a service to send and receive messages from a registered UEFI service.
+
+ @param[in] This The EFI_MM_COMMUNICATION3_PROTOCOL instance.
+ @param[in, out] CommBufferPhysical Physical address of the MM communication buffer, of which content must
+ start with EFI_MM_COMMUNICATE_HEADER_V3.
+ @param[in, out] CommBufferVirtual Virtual address of the MM communication buffer, of which content must
+ start with EFI_MM_COMMUNICATE_HEADER_V3.
+ @param[in, out] CommSize The size of the data buffer being passed in. On exit, the size of data
+ being returned. Zero if the handler does not wish to reply with any data.
+ This parameter is optional and may be NULL.
+
+ @retval EFI_SUCCESS The message was successfully posted.
+ @retval EFI_INVALID_PARAMETER CommBufferPhysical was NULL or CommBufferVirtual was NULL.
+ @retval EFI_BAD_BUFFER_SIZE The buffer is too large for the MM implementation.
+ If this error is returned, the MessageLength field
+ in the CommBuffer header or the integer pointed by
+ CommSize, are updated to reflect the maximum payload
+ size the implementation can accommodate.
+ @retval EFI_ACCESS_DENIED The CommunicateBuffer parameter or CommSize parameter,
+ if not omitted, are in address range that cannot be
+ accessed by the MM environment.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_MM_COMMUNICATE3)(
+ IN CONST EFI_MM_COMMUNICATION3_PROTOCOL *This,
+ IN OUT VOID *CommBufferPhysical,
+ IN OUT VOID *CommBufferVirtual,
+ IN OUT UINTN *CommSize OPTIONAL
+ );
+
+///
+/// EFI MM Communication Protocol provides runtime services for communicating
+/// between DXE drivers and a registered MMI handler.
+///
+struct _EFI_MM_COMMUNICATION3_PROTOCOL {
+ EFI_MM_COMMUNICATE3 Communicate;
+};
+
+extern EFI_GUID gEfiMmCommunication3ProtocolGuid;
+
+#endif
diff --git a/MdePkg/MdePkg.dec b/MdePkg/MdePkg.dec
index 11c08e617511..8c61661e4ee7 100644
--- a/MdePkg/MdePkg.dec
+++ b/MdePkg/MdePkg.dec
@@ -1357,6 +1357,9 @@ [Protocols]
## Include/Protocol/MmCommunication2.h
gEfiMmCommunication2ProtocolGuid = { 0x378daedc, 0xf06b, 0x4446, { 0x83, 0x14, 0x40, 0xab, 0x93, 0x3c, 0x87, 0xa3 }}

+ ## Include/Protocol/MmCommunication3.h
+ gEfiMmCommunication3ProtocolGuid = { 0xf7234a14, 0xdf2, 0x46c0, { 0xad, 0x28, 0x90, 0xe6, 0xb8, 0x83, 0xa7, 0x2f }}
+
#
# Protocols defined in UEFI2.1/UEFI2.0/EFI1.1
#
--
2.34.1.windows.1

Join devel@edk2.groups.io to automatically receive all group messages.