[PATCH v3 0/6] Arm 32bit support in PlatformStandaloneMmRpmb

Etienne Carriere

This series brings support for building PlatformStandaloneMmRpmb for
32bit Arm architectures. This series is based on series tracked through
[1] in edk2 that allows to build StandaloneMm package for 32bit Arm.
This series starts by syncing with paths changes from [1] series,
then comes changes for Arm 32bit support in OpTee drivers and last
updates PlatformStandaloneMmRpmb.dsc for 32bit the ARM architure.
This series is tracked through ticket [2].

One can test the generated StMM image with OP-TEE release for
stm32mp157c-ev1 board which integrates an eMMC device with a
RPMB partition. Se below are the fetch/build directives.
Note that enabling EFI secure boot on stm32mp1 needs more than the
build instruction below. At least these show how U-Boot and OP-TEE
can leverage StMM with an RPMB device.

Step 1: fetch edk2, edk2-platforms, apply patches and Build StMM.
I build edk2 with the following command (one shall replace ${path_to_xxx}
with the appropriate paths.

# export WORKSPACE=${path_to_edk2_build_dir}
# export PACKAGES_PATH=${path_to_edk2}:${path_to_edk2_platforms}
# source ${path_to_edk2}/edksetup.sh
# make -j$(nproc) -C ${path_to_edk2}/BaseTools
# GCC5_ARM_PREFIX=${path_to_arm_tooclain}/bin/arm-linux-gnueabihf- \
build -n $(nproc) -a ARM -t GCC5 -b RELEASE -D DO_X86EMU=TRUE \
-p Platform/StandaloneMm/PlatformStandaloneMmPkg/PlatformStandaloneMmRpmb.dsc \

Step 2: clone and build OP-TEE release for stm32mp1 (see also [3]):

# mkdir /tmp/optee-stm32mp1-stmm
# cd /tmp/optee-stm32mp1-stmm
# repo init -u https://github.com/OP-TEE/manifest.git -t 3.14.0 -m stm32mp1.xml
# repo sync
# cd build
# make toolchains
# make all

Step 3: sync with U-Boot master branch, at least commit [4] which merges
a fix in MMC/RPMB driver OP-TEE [5]. Platform defconfig must be changed
to enable StMM and RPMB support.
The command below builds u-boot using OP-TEE build env (from build/ dir)

# git -C ../u-boot checkout 99bb5f248ade371ee4713e0ef51401708ecbb13c
# echo CONFIG_EFI_MM_COMM_TEE=y >> ../u-boot/configs/stm32mp15_trusted_defconfig
# echo CONFIG_SUPPORT_EMMC_RPMB=y >> ../u-boot/configs/stm32mp15_trusted_defconfig
# make u-boot

Step 4: rebuild optee_os (and SDcard image) with StMM image embedded in
OP-TEE core wand RPMB support for stm32mp15c-ev1 (the board has an eMMC
device with an RPMB partition).
The command below builds u-boot using OP-TEE build env.

# make optee-os all \
CFG_STMM_PATH=${path_to_edk2_build_dir}/Build/MmStandaloneRpmb/RELEASE_GCC5/FV/BL32_AP_MM.fd \
PLATFORM=stm32mp1-157C_ED1 \

Once done, program SDcard (/dev/sdX relates to SDcard slot device file)
# dd conf=fdatasync if=../out/bin/sdcard of=/dev/sdX # where /dev/sdX is

The target (stm32mp157c-ev1 board) can boot with the programmed
SDcard. One can interrupt the U-Boot console, possibly program
RPMB key (see note below) and read the EFI variable (read from the
RPMB though StMM executing in OP-TEE.

$ printenv -e # read EFI variables
$ setenv -e <some args> # write an EFI variable

Note about the RPMB key:
With the build instructions above, OP-TEE assumes the RPMB device key
is generated from a known derivation of an all-zero root key. If the
RPMB device key was not yet programmed, one can program it from the
U-Boot console with command 'mmc rpmc key <key-data-address>. The
commands below can be used to program the platform default RPMB
development key that is (hexadecimal notation, first byte first):
15 46 75 8c 61 8e d8 b8 a2 27 89 02 df 54 ef 63
11 de e2 96 49 99 5b d7 d9 12 f1 53 6d 8a 67 c7

$ mw.l 0xc0000000 0x8c754615
$ mw.l 0xc0000004 0xb8d88e61
$ mw.l 0xc0000008 0x028927a2
$ mw.l 0xc000000c 0x63ef54df
$ mw.l 0xc0000010 0x96e2de11
$ mw.l 0xc0000014 0xd75b9949
$ mw.l 0xc0000018 0x53f112d9
$ mw.l 0xc000001c 0xc7678a6d
$ mmc rpmb key 0xc0000000

[1] https://bugzilla.tianocore.org/show_bug.cgi?id=3381
[2] https://bugzilla.tianocore.org/show_bug.cgi?id=3383
[3] https://optee.readthedocs.io/en/latest/building/devices/stm32mp1.html#build-instructions
[4] https://source.denx.de/u-boot/u-boot/-/commit/99bb5f248ade371ee4713e0ef51401708ecbb13c
[5] https://source.denx.de/u-boot/u-boot/-/commit/a9f7be509af90fa5f2c308867ad3b0bd48532c6e

Etienne Carriere (6):
Platform/ARM/SgiPkg: sync with edk2 StandaloneMmCpu path change
Platform/Socionext/DeveloperBox: sync with edk2 StandaloneMmCpu path
Platform/StandaloneMm: sync with edk2 StandaloneMmCpu path change
Drivers/OpTee: Add Aarch32 SVC IDs for 32bit Arm targets
Drivers/OpTee: address cast build warning issue in 32b mode
Platform/StandaloneMm: build StandaloneMmRpmb for 32bit architectures

Drivers/OpTee/OpteeRpmbPkg/OpTeeRpmbFvb.c | 23 ++++++++++++-------
Drivers/OpTee/OpteeRpmbPkg/OpTeeRpmbFvb.h | 16 +++++++++++--
Platform/ARM/SgiPkg/PlatformStandaloneMm.fdf | 2 +-
Platform/ARM/SgiPkg/SgiPlatformMm.dsc.inc | 2 +-
.../Socionext/DeveloperBox/DeveloperBoxMm.dsc | 2 +-
.../Socionext/DeveloperBox/DeveloperBoxMm.fdf | 2 +-
.../PlatformStandaloneMmRpmb.dsc | 14 +++++++++--
.../PlatformStandaloneMmRpmb.fdf | 3 ++-
8 files changed, 47 insertions(+), 17 deletions(-)


Join devel@edk2.groups.io to automatically receive all group messages.