[PATCH v2] UefiCpuPkg/MpInitLib: Allocate a separate SEV-ES AP reset stack area


Lendacky, Thomas
 

BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=3324

The SEV-ES stacks currently share a page with the reset code and data.
Separate the SEV-ES stacks from the reset vector code and data to avoid
possible stack overflows from overwriting the code and/or data.

When SEV-ES is enabled, invoke the GetWakeupBuffer() routine a second time
to allocate a new area, below the reset vector and data.

Both the PEI and DXE versions of GetWakeupBuffer() are changed so that
when PcdSevEsIsEnabled is true, they will track the previous reset buffer
allocation in order to ensure that the new buffer allocation is below the
previous allocation. When PcdSevEsIsEnabled is false, the original logic
is followed.

Fixes: 7b7508ad784d16a5208c8d12dff43aef6df0835b
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Cc: Marvin Häuser <mhaeuser@posteo.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>

---

Changes since v1:
- Renamed the wakeup buffer variables to be unique in the PEI and DXE
libraries and to make it obvious they are SEV-ES specific.
- Use PcdGetBool (PcdSevEsIsEnabled) to make the changes regression-free
so that the new support is only use for SEV-ES guests.
---
UefiCpuPkg/Library/MpInitLib/DxeMpLib.c | 19 +++++++-
UefiCpuPkg/Library/MpInitLib/MpLib.c | 49 +++++++++++++-------
UefiCpuPkg/Library/MpInitLib/PeiMpLib.c | 19 +++++++-
3 files changed, 69 insertions(+), 18 deletions(-)

diff --git a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
index 7839c249760e..93fc63bf93e3 100644
--- a/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/DxeMpLib.c
@@ -29,6 +29,11 @@ VOID *mReservedApLoopFunc = NULL;
UINTN mReservedTopOfApStack;
volatile UINT32 mNumberToFinish = 0;

+//
+// Begin wakeup buffer allocation below 0x88000
+//
+STATIC EFI_PHYSICAL_ADDRESS mSevEsDxeWakeupBuffer = 0x88000;
+
/**
Enable Debug Agent to support source debugging on AP function.

@@ -102,7 +107,14 @@ GetWakeupBuffer (
// LagacyBios driver depends on CPU Arch protocol which guarantees below
// allocation runs earlier than LegacyBios driver.
//
- StartAddress = 0x88000;
+ if (PcdGetBool (PcdSevEsIsEnabled)) {
+ //
+ // SEV-ES Wakeup buffer should be under 0x88000 and under any previous one
+ //
+ StartAddress = mSevEsDxeWakeupBuffer;
+ } else {
+ StartAddress = 0x88000;
+ }
Status = gBS->AllocatePages (
AllocateMaxAddress,
MemoryType,
@@ -112,6 +124,11 @@ GetWakeupBuffer (
ASSERT_EFI_ERROR (Status);
if (EFI_ERROR (Status)) {
StartAddress = (EFI_PHYSICAL_ADDRESS) -1;
+ } else if (PcdGetBool (PcdSevEsIsEnabled)) {
+ //
+ // Next SEV-ES wakeup buffer allocation must be below this allocation
+ //
+ mSevEsDxeWakeupBuffer = StartAddress;
}

DEBUG ((DEBUG_INFO, "WakeupBufferStart = %x, WakeupBufferSize = %x\n",
diff --git a/UefiCpuPkg/Library/MpInitLib/MpLib.c b/UefiCpuPkg/Library/MpInitLib/MpLib.c
index dc2a54aa31e8..b9a06747edbf 100644
--- a/UefiCpuPkg/Library/MpInitLib/MpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/MpLib.c
@@ -1164,20 +1164,6 @@ GetApResetVectorSize (
AddressMap->SwitchToRealSize +
sizeof (MP_CPU_EXCHANGE_INFO);

- //
- // The AP reset stack is only used by SEV-ES guests. Do not add to the
- // allocation if SEV-ES is not enabled.
- //
- if (PcdGetBool (PcdSevEsIsEnabled)) {
- //
- // Stack location is based on APIC ID, so use the total number of
- // processors for calculating the total stack area.
- //
- Size += AP_RESET_STACK_SIZE * PcdGet32 (PcdCpuMaxLogicalProcessorNumber);
-
- Size = ALIGN_VALUE (Size, CPU_STACK_ALIGNMENT);
- }
-
return Size;
}

@@ -1192,6 +1178,7 @@ AllocateResetVector (
)
{
UINTN ApResetVectorSize;
+ UINTN ApResetStackSize;

if (CpuMpData->WakeupBuffer == (UINTN) -1) {
ApResetVectorSize = GetApResetVectorSize (&CpuMpData->AddressMap);
@@ -1207,9 +1194,39 @@ AllocateResetVector (
CpuMpData->AddressMap.ModeTransitionOffset
);
//
- // The reset stack starts at the end of the buffer.
+ // The AP reset stack is only used by SEV-ES guests. Do not allocate it
+ // if SEV-ES is not enabled.
//
- CpuMpData->SevEsAPResetStackStart = CpuMpData->WakeupBuffer + ApResetVectorSize;
+ if (PcdGetBool (PcdSevEsIsEnabled)) {
+ //
+ // Stack location is based on ProcessorNumber, so use the total number
+ // of processors for calculating the total stack area.
+ //
+ ApResetStackSize = (AP_RESET_STACK_SIZE *
+ PcdGet32 (PcdCpuMaxLogicalProcessorNumber));
+
+ //
+ // Invoke GetWakeupBuffer a second time to allocate the stack area
+ // below 1MB. The returned buffer will be page aligned and sized and
+ // below the previously allocated buffer.
+ //
+ CpuMpData->SevEsAPResetStackStart = GetWakeupBuffer (ApResetStackSize);
+
+ //
+ // Check to be sure that the "allocate below" behavior hasn't changed.
+ // This will also catch a failed allocation, as "-1" is returned on
+ // failure.
+ //
+ if (CpuMpData->SevEsAPResetStackStart >= CpuMpData->WakeupBuffer) {
+ DEBUG ((
+ DEBUG_ERROR,
+ "SEV-ES AP reset stack is not below wakeup buffer\n"
+ ));
+
+ ASSERT (FALSE);
+ CpuDeadLoop ();
+ }
+ }
}
BackupAndPrepareWakeupBuffer (CpuMpData);
}
diff --git a/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c b/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
index 3989bd6a7a9f..90015c650c68 100644
--- a/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
+++ b/UefiCpuPkg/Library/MpInitLib/PeiMpLib.c
@@ -11,6 +11,8 @@
#include <Guid/S3SmmInitDone.h>
#include <Ppi/ShadowMicrocode.h>

+STATIC UINT64 mSevEsPeiWakeupBuffer = BASE_1MB;
+
/**
S3 SMM Init Done notification function.

@@ -220,7 +222,13 @@ GetWakeupBuffer (
// Need memory under 1MB to be collected here
//
WakeupBufferEnd = Hob.ResourceDescriptor->PhysicalStart + Hob.ResourceDescriptor->ResourceLength;
- if (WakeupBufferEnd > BASE_1MB) {
+ if (PcdGetBool (PcdSevEsIsEnabled) &&
+ WakeupBufferEnd > mSevEsPeiWakeupBuffer) {
+ //
+ // SEV-ES Wakeup buffer should be under 1MB and under any previous one
+ //
+ WakeupBufferEnd = mSevEsPeiWakeupBuffer;
+ } else if (WakeupBufferEnd > BASE_1MB) {
//
// Wakeup buffer should be under 1MB
//
@@ -244,6 +252,15 @@ GetWakeupBuffer (
}
DEBUG ((DEBUG_INFO, "WakeupBufferStart = %x, WakeupBufferSize = %x\n",
WakeupBufferStart, WakeupBufferSize));
+
+ if (PcdGetBool (PcdSevEsIsEnabled)) {
+ //
+ // Next SEV-ES wakeup buffer allocation must be below this
+ // allocation
+ //
+ mSevEsPeiWakeupBuffer = WakeupBufferStart;
+ }
+
return (UINTN)WakeupBufferStart;
}
}
--
2.31.0

Join devel@edk2.groups.io to automatically receive all group messages.