[PATCH 07/11] OvmfPkg/LsiScsiDxe: Open PciIo protocol and initialize the device


Gary Lin
 

Open PciIo protocol and use it to initialize the device. The
initialization of LSI 53C895A is simple: just set the SRST bit in
Interrupt Status Zero register to reset the device.

Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
---
OvmfPkg/Include/IndustryStandard/LsiScsi.h | 21 ++++
OvmfPkg/LsiScsiDxe/LsiScsi.c | 129 ++++++++++++++++++++-
OvmfPkg/LsiScsiDxe/LsiScsi.h | 3 +
3 files changed, 152 insertions(+), 1 deletion(-)

diff --git a/OvmfPkg/Include/IndustryStandard/LsiScsi.h b/OvmfPkg/Include/IndustryStandard/LsiScsi.h
index c09e864a1f39..60e527f1c6a7 100644
--- a/OvmfPkg/Include/IndustryStandard/LsiScsi.h
+++ b/OvmfPkg/Include/IndustryStandard/LsiScsi.h
@@ -17,4 +17,25 @@
#define LSI_LOGIC_PCI_VENDOR_ID 0x1000
#define LSI_53C895A_PCI_DEVICE_ID 0x0012

+//
+// LSI 53C895A Registers
+//
+#define LSI_REG_DSTAT 0x0C
+#define LSI_REG_ISTAT0 0x14
+#define LSI_REG_DSP 0x2C
+#define LSI_REG_SIST0 0x42
+#define LSI_REG_SIST1 0x43
+
+//
+// The status bits for Interrupt Status Zero (ISTAT0)
+//
+#define LSI_ISTAT0_DIP 0x01
+#define LSI_ISTAT0_SIP 0x02
+#define LSI_ISTAT0_INTF 0x04
+#define LSI_ISTAT0_CON 0x08
+#define LSI_ISTAT0_SEM 0x10
+#define LSI_ISTAT0_SIGP 0x20
+#define LSI_ISTAT0_SRST 0x40
+#define LSI_ISTAT0_ABRT 0x80
+
#endif // _LSI_SCSI_H_
diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.c b/OvmfPkg/LsiScsiDxe/LsiScsi.c
index e10a81a5f9f7..f03774cc4ced 100644
--- a/OvmfPkg/LsiScsiDxe/LsiScsi.c
+++ b/OvmfPkg/LsiScsiDxe/LsiScsi.c
@@ -25,6 +25,33 @@

#include "LsiScsi.h"

+STATIC
+EFI_STATUS
+Out8 (
+ IN LSI_SCSI_DEV *Dev,
+ IN UINT32 Addr,
+ IN UINT8 Data
+ )
+{
+ return Dev->PciIo->Io.Write (
+ Dev->PciIo,
+ EfiPciIoWidthUint8,
+ PCI_BAR_IDX0,
+ Addr,
+ 1,
+ &Data
+ );
+}
+
+STATIC
+EFI_STATUS
+LsiScsiReset (
+ IN LSI_SCSI_DEV *Dev
+ )
+{
+ return Out8 (Dev, LSI_REG_ISTAT0, LSI_ISTAT0_SRST);
+}
+
//
// The next seven functions implement EFI_EXT_SCSI_PASS_THRU_PROTOCOL
// for the LSI 53C895A SCSI Controller. Refer to UEFI Spec 2.3.1 + Errata C,
@@ -246,6 +273,21 @@ LsiScsiGetNextTarget (
return EFI_NOT_FOUND;
}

+STATIC
+VOID
+EFIAPI
+LsiScsiExitBoot (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ LSI_SCSI_DEV *Dev;
+
+ Dev = Context;
+ DEBUG ((DEBUG_VERBOSE, "%a: Context=0x%p\n", __FUNCTION__, Context));
+ LsiScsiReset (Dev);
+}
+
//
// Probe, start and stop functions of this driver, called by the DXE core for
// specific devices.
@@ -328,6 +370,58 @@ LsiScsiControllerStart (
Dev->MaxTarget = PcdGet8 (PcdLsiScsiMaxTargetLimit);
Dev->MaxLun = PcdGet8 (PcdLsiScsiMaxLunLimit);

+ Status = gBS->OpenProtocol (
+ ControllerHandle,
+ &gEfiPciIoProtocolGuid,
+ (VOID **)&Dev->PciIo,
+ This->DriverBindingHandle,
+ ControllerHandle,
+ EFI_OPEN_PROTOCOL_BY_DRIVER
+ );
+ if (EFI_ERROR (Status)) {
+ goto FreePool;
+ }
+
+ Status = Dev->PciIo->Attributes (
+ Dev->PciIo,
+ EfiPciIoAttributeOperationGet,
+ 0,
+ &Dev->OrigPciAttrs
+ );
+ if (EFI_ERROR (Status)) {
+ goto CloseProtocol;
+ }
+
+ //
+ // Enable I/O Space & Bus-Mastering
+ //
+ Status = Dev->PciIo->Attributes (
+ Dev->PciIo,
+ EfiPciIoAttributeOperationEnable,
+ (EFI_PCI_IO_ATTRIBUTE_IO |
+ EFI_PCI_IO_ATTRIBUTE_BUS_MASTER),
+ NULL
+ );
+ if (EFI_ERROR (Status)) {
+ goto CloseProtocol;
+ }
+
+ Status = LsiScsiReset (Dev);
+ if (EFI_ERROR (Status)) {
+ goto RestoreAttributes;
+ }
+
+ Status = gBS->CreateEvent (
+ EVT_SIGNAL_EXIT_BOOT_SERVICES,
+ TPL_CALLBACK,
+ &LsiScsiExitBoot,
+ Dev,
+ &Dev->ExitBoot
+ );
+ if (EFI_ERROR (Status)) {
+ goto UninitDev;
+ }
+
//
// Host adapter channel, doesn't exist
//
@@ -352,11 +446,33 @@ LsiScsiControllerStart (
&Dev->PassThru
);
if (EFI_ERROR (Status)) {
- goto FreePool;
+ goto CloseExitBoot;
}

return EFI_SUCCESS;

+CloseExitBoot:
+ gBS->CloseEvent (Dev->ExitBoot);
+
+UninitDev:
+ LsiScsiReset (Dev);
+
+RestoreAttributes:
+ Dev->PciIo->Attributes (
+ Dev->PciIo,
+ EfiPciIoAttributeOperationSet,
+ Dev->OrigPciAttrs,
+ NULL
+ );
+
+CloseProtocol:
+ gBS->CloseProtocol (
+ ControllerHandle,
+ &gEfiPciIoProtocolGuid,
+ This->DriverBindingHandle,
+ ControllerHandle
+ );
+
FreePool:
FreePool (Dev);

@@ -399,6 +515,17 @@ LsiScsiControllerStop (
return Status;
}

+ gBS->CloseEvent (Dev->ExitBoot);
+
+ LsiScsiReset (Dev);
+
+ Dev->PciIo->Attributes (
+ Dev->PciIo,
+ EfiPciIoAttributeOperationSet,
+ Dev->OrigPciAttrs,
+ NULL
+ );
+
gBS->CloseProtocol (
ControllerHandle,
&gEfiPciIoProtocolGuid,
diff --git a/OvmfPkg/LsiScsiDxe/LsiScsi.h b/OvmfPkg/LsiScsiDxe/LsiScsi.h
index a3d51d8f2386..ffaee6188536 100644
--- a/OvmfPkg/LsiScsiDxe/LsiScsi.h
+++ b/OvmfPkg/LsiScsiDxe/LsiScsi.h
@@ -14,6 +14,9 @@

typedef struct {
UINT32 Signature;
+ UINT64 OrigPciAttrs;
+ EFI_EVENT ExitBoot;
+ EFI_PCI_IO_PROTOCOL *PciIo;
UINT8 MaxTarget;
UINT8 MaxLun;
EFI_EXT_SCSI_PASS_THRU_MODE PassThruMode;
--
2.25.1

Join devel@edk2.groups.io to automatically receive all group messages.